300-415 ENSDWI — Cisco Certified Specialist - Enterprise SD-WAN Implementation
Test your knowledge with official exam-style questions
Questions and options are shuffled each attempt
Email me this practice set
Get a link sent to your inbox so you can pick this back up anytime.
▶Cisco Certified Specialist - Enterprise SD-WAN Implementation — Practice Set 1: All Questions & Explanations
Full question text, answer options, and explanations for this practice set — a spoiler-free alternative is the interactive quiz above for scored, shuffled practice.
1. A new engineer is asked which Cisco Catalyst SD-WAN component authenticates devices that want to join the overlay, acts as the NAT-traversal orchestrator, and keeps no state. Which component is this?
- A. Cisco SD-WAN Validator (vBond)(correct)
- B. WAN Edge router
- C. Cisco SD-WAN Controller (vSmart)
- D. Cisco SD-WAN Manager (vManage)
Explanation: The Cisco SD-WAN Validator authenticates devices joining the overlay, coordinates connectivity between edge routers and controllers, serves as the NAT-traversal orchestrator, and the guide states it maintains no state. Why the other options are wrong: B) The WAN Edge router is responsible for the data traffic across the network, not for orchestrating the overlay. C) The Controller oversees the control plane, runs OMP and applies policy; authenticating joining devices and NAT orchestration belong to the Validator. D) The Manager is the centralized network management system that stores certificates and creates and pushes device configurations; it is not the NAT-traversal orchestrator.
2. Which statement correctly contrasts the roles of the SD-WAN controllers and the WAN Edge routers with respect to user traffic?
- A. The SD-WAN Validator relays IPsec user traffic whenever a NAT device sits between two sites
- B. WAN Edge routers are responsible for the data traffic sent across the network, while the controllers are involved only in control plane communication(correct)
- C. The SD-WAN Manager forwards user data to remote sites over its NETCONF sessions
- D. The SD-WAN Controller forwards user data between sites and the WAN Edge routers handle only the control connections
Explanation: Cisco states that the edge router, whether hardware or software, is responsible for the data traffic sent across the network, and that the controllers do not handle any of the data traffic; they are involved only in control plane communication. Why the other options are wrong: A) The Validator acts as the NAT-traversal orchestrator for control and connectivity coordination and maintains no state; it does not relay user traffic. C) NETCONF inside SSH is how the Manager manages devices; it is a management channel and not a data-forwarding path. D) This reverses the roles. The Controller maintains the control plane and runs OMP, and does not handle data traffic.
3. A team is documenting how the SD-WAN overlay relates to the underlay transport. Which description of a TLOC matches the Cisco guide?
- A. It identifies the physical interface where an edge router connects to the transport network, and it is the only entity of the OMP routing domain visible to the underlying network(correct)
- B. It is the certificate chain identifier that the Validator uses to authorize an edge router
- C. It is a QoS queue number that carries BFD and control traffic on the WAN edge
- D. It is the service-side VPN identifier that isolates one department from another
Explanation: The guide describes a TLOC as identifying the physical interface where an edge router connects to the transport network, and says the TLOC is the only entity of the OMP routing domain that is visible to the underlying network; it acts as the next hop for OMP routes. Why the other options are wrong: B) Certificates and serial number lists are handled by the certificate and device-list mechanisms, not by a TLOC. C) TLOCs are not QoS queue numbers; queues are part of the forwarding and QoS configuration. D) Service-side isolation is provided by VPNs/VRFs, not by TLOCs. TLOCs sit in the transport (global VRF) side.
4. An architect asks whether BFD on the SD-WAN overlay has to be turned on tunnel by tunnel. Which statement is accurate?
- A. Overlay BFD operates by default and cannot be disabled, and it also measures latency, loss and jitter that application-aware routing uses(correct)
- B. BFD statistics are collected by the Manager using NETCONF and never by the devices
- C. BFD runs only on the control connections between the WAN Edge and the SD-WAN Controller
- D. BFD must be enabled by the administrator on each tunnel before the tunnel can carry traffic
Explanation: The routing guide states overlay BFD operates by default and cannot be disabled; it detects failures in the overlay tunnel and measures latency, loss, jitter and other link statistics used by application-aware routing. The system overview adds that BFD starts automatically once a tunnel is up. Why the other options are wrong: B) The devices themselves run BFD and measure the path statistics; the Manager is not the measurement source. C) BFD protects the data plane tunnels between devices (to ensure fast data plane convergence after transport failure); control connections use DTLS/TLS. D) BFD starts automatically on a tunnel once it is up; no per-tunnel enablement is required.
5. A company deploys Multi-Region Fabric with two access regions and no secondary regions. An edge router in region 1 sends traffic to an edge router in region 2. How does the traffic travel according to Cisco documentation?
- A. Over a single direct tunnel between the two edge routers
- B. Through the SD-WAN Manager, which relays traffic between regions that do not share a controller
- C. Through the SD-WAN Controller, which forwards the packets between regions
- D. From the source edge router to its border router, then to the destination region border router, then to the destination edge router, which is three tunnels(correct)
Explanation: In Multi-Region Fabric, edge routers do not connect directly across regions. Inter-region traffic goes source edge router, source border router, target-region border router, destination edge router, so it traverses three tunnels. Why the other options are wrong: A) A single direct tunnel is used for intra-region traffic; edge routers in different regions do not connect directly (secondary regions are the mechanism that permits that). B) The Manager is a management system and does not forward overlay data traffic. C) Controllers are control plane devices and do not forward data traffic.
6. What deployment order does Cisco recommend when bringing up a new Catalyst SD-WAN overlay?
- A. SD-WAN Manager, then SD-WAN Validator, then SD-WAN Controller, then the routers(correct)
- B. All components at once; order has no effect because every device retries until it connects
- C. WAN Edge routers first, then SD-WAN Controller, then Validator, then Manager
- D. SD-WAN Controller first, then Manager, then routers, then Validator
Explanation: The bring-up guide recommends deploying Cisco SD-WAN Manager, then the Validator (vBond), then the Controller (vSmart), then the routers, which is the order in which the devices verify and authenticate themselves. Why the other options are wrong: B) Devices do retry until the Validator is reachable, but the guide still states the recommended deployment order, so order does matter for a clean bring-up. C) Routers need the controllers and Validator in place to authenticate, so they come last. D) The Validator is the initial contact point and comes before the Controller; routers are last.
7. A branch router is configured with the organization name "Contoso-Corp", but the controllers were configured with "contoso-corp". Which bring-up requirement is being violated?
- A. The organization name must be different on each device so that serial numbers remain unique
- B. The organization name must be identical, and is case-sensitive, on all devices that belong to a single organization(correct)
- C. The organization name only needs to match on the Validator and the Manager
- D. The organization name is optional and is not part of the device certificate
Explanation: The guide states that the organization name must be identical on all the devices that belong to a single organization, that it is case-sensitive, and that it is included in each device configuration and certificate. Why the other options are wrong: A) Devices of one organization share the same organization name; uniqueness is provided by serial and chassis numbers. C) The requirement applies to all devices in the organization, not only two of them. D) The organization name is part of each device configuration and certificate, so it is not optional.
8. What is the minimum a WAN Edge router must have in its initial configuration so that it can start to find the overlay controllers?
- A. The IP addresses of every SD-WAN Controller in the overlay
- B. The IP address or DNS name of the SD-WAN Validator(correct)
- C. The serial number file for all controllers
- D. A complete policy configuration pushed by the Manager
Explanation: The guide says an edge router initial configuration must contain, at a minimum, the Validator IP address or DNS name. The Validator then sends routers the addresses of the controllers. Why the other options are wrong: A) Routers learn the controller addresses from the Validator; they do not need to be preconfigured with them. C) The authorized controller serial numbers are kept by the Validator and Manager, not typed into the edge router. D) Policy is not required for control connections; the bootstrap guidance even says not to include policy configuration in a bootstrap file.
9. Which statement correctly describes how the authorized controller serial numbers reach the controllers in the overlay?
- A. The Validator generates them when the first router connects
- B. The administrator uploads the vEdge authorized serial number file to the WAN Edge routers only
- C. Each controller learns the serial numbers of the others by DTLS broadcast
- D. The Manager learns them during certificate creation and downloads them to the Validator, which pushes them to the controllers(correct)
Explanation: Cisco states that controller authorized serial numbers are learned by the Manager during certificate creation, downloaded to the Validator, and pushed by the Validator to the controllers. Why the other options are wrong: A) Serial numbers are learned by the Manager at certificate generation, not when the first router connects. B) The authorized serial number file lists vEdge serial and chassis numbers and is uploaded to the Validators and Controllers, not only to the routers. C) There is no broadcast discovery mechanism described; the Manager and Validator distribute the list.
10. During zero-touch provisioning of a new branch router, what does the ZTP server do once it has authenticated the device?
- A. It installs the signed control component certificates
- B. It pushes the full device template directly to the router
- C. It hands the router the policy that was built on the Controller
- D. It redirects the device to the SD-WAN Validator(correct)
Explanation: The Quick Connect documentation states that the ZTP server authenticates the device and redirects it to the SD-WAN Validator; onboarding concludes with the device being authenticated by the Validator. Why the other options are wrong: A) Control component certificates are managed through the Manager certificate workflows, not by the ZTP server. B) Configuration is received from the Manager after onboarding; the ZTP server does not push a device template. C) Centralized control policy stays on the Controller and is never pushed to devices.
11. A factory-default hardware WAN Edge router will be onboarded using a bootstrap configuration file on a bootable USB drive. What file name must be used?
- A. startup-config.cfg
- B. sdwan-bootstrap.txt
- C. ciscosdwan_cloud_init.cfg
- D. ciscosdwan.cfg(correct)
Explanation: For hardware devices the bootstrap file name is ciscosdwan.cfg, and the guide says the file must be named exactly as shown or the device will not read it. Why the other options are wrong: A) startup-config.cfg is not the documented bootstrap file name. B) sdwan-bootstrap.txt is not a documented bootstrap file name; the file must be named exactly as documented. C) ciscosdwan_cloud_init.cfg is the name used for software devices and OTP-authenticated devices, not for hardware devices.
12. What is the default OMP graceful restart timer?
- A. 43200 seconds (12 hours)(correct)
- B. 604800 seconds (7 days)
- C. 3600 seconds (1 hour)
- D. 300 seconds (5 minutes)
Explanation: The OMP configuration guide gives the graceful restart timer default as 43200 seconds (12 hours), with a range of 0 to 604800 seconds; setting it to 0 disables graceful restart. Why the other options are wrong: B) 604800 seconds (7 days) is the maximum configurable graceful restart value, not the default. C) 3600 seconds is the upper end of the EOR timer range, not the graceful restart default. D) 300 seconds is the default of the End-of-RIB (EOR) timer, not the graceful restart timer.
13. By default, how many OMP paths per prefix does a device advertise (send-path-limit), and what range can be configured?
- A. The default is 1, and the range is 1 through 4
- B. The default is 16, and the range is 4 through 32
- C. The default is 4, and the range is 1 through 16(correct)
- D. The default is 8, and the range is 1 through 8
Explanation: The OMP configuration guide lists the send-path-limit (Paths Advertised Per Prefix) range as 1 through 16 with a default of 4. Why the other options are wrong: A) 1 is the bottom of the range, not the default, and the range extends to 16. B) 16 is the top of the range; it is not the default and the range starts at 1. D) The default is not 8 and the range is not limited to 8.
14. The hub-and-spoke feature is enabled on the SD-WAN Controllers with "topology hub-and-spoke enable" and the data center router is configured as a transport gateway. Which behavior results for spoke routers?
- A. Spokes receive TLOCs and routes for the hubs only, so no BFD sessions form between spokes and spoke-to-spoke traffic flows through the transport gateway(correct)
- B. Only the first spoke-to-spoke packet goes through the hub, then a direct tunnel is built on demand
- C. Spokes receive TLOCs and routes for all other spokes and form direct BFD sessions with them
- D. Spokes receive no TLOC information at all and rely on static routes toward the hub
Explanation: The guide says controllers filter the TLOC and route information they advertise: hubs receive everything, while spokes receive TLOC and route information for the hubs only. Spokes therefore have no BFD sessions between them, and all spoke-to-spoke traffic flows through the transport gateway, which re-originates routes. Why the other options are wrong: B) On-demand tunnels are explicitly not supported with this hub-and-spoke feature, and spokes do not receive each other TLOCs. C) That would be a full mesh; the feature specifically prevents spokes from receiving other spokes TLOCs and routes. D) Spokes do receive the hub TLOCs and routes; they are not left without overlay information.
15. In a centralized policy, what happens by default to traffic or routes that match no sequence?
- A. Nonmatching routes are accepted and nonmatching data packets are dropped
- B. Nonmatching routes are rejected and nonmatching data packets are forwarded normally
- C. Nonmatching routes and data packets are both accepted
- D. A nonmatching route or TLOC in a control policy is rejected, and a nonmatching data packet in a data policy is dropped(correct)
Explanation: Cisco states that for a control policy "by default, the route or TLOC is rejected" and for a data policy "by default, the data packet is dropped" when no sequence matches. In the CLI, default-action accept changes the control policy default. Why the other options are wrong: A) Control policy does not accept by default; it rejects unless default-action accept is configured. B) Data policy does not forward unmatched packets by default; it drops them. C) Both defaults are restrictive, not permissive.
16. Where is a centralized control policy stored and enforced, as opposed to a centralized data policy?
- A. A control policy is pushed to the edge routers, and a data policy stays on the Controller
- B. Both are pushed to every WAN Edge router as soon as they are activated
- C. Both stay on the Manager and are evaluated by the Validator
- D. A centralized control policy stays on the SD-WAN Controller and is never pushed to local devices, while a centralized data policy is pushed to the selected devices(correct)
Explanation: The policy overview states that the centralized control policy configuration remains on the Controller and is never pushed to local devices, whereas centralized data policies are pushed to the selected IOS XE Catalyst SD-WAN devices. Why the other options are wrong: A) This reverses the two behaviors. B) Control policy is never pushed to devices. C) The Validator does not evaluate policy; centralized policy is provisioned on the Controllers.
17. Which set of direction keywords is valid on the apply-policy command for a centralized data policy?
- A. from-vpn and to-vpn
- B. in and out
- C. all, from-service and from-tunnel(correct)
- D. ingress and egress
Explanation: The documented syntax is apply-policy site-list list-name data-policy policy-name (all | from-service | from-tunnel). The in or out keywords apply to control policies. Why the other options are wrong: A) from-vpn and to-vpn are not documented apply-policy direction keywords. B) in and out are the direction keywords for control policy, not for data policy. D) ingress and egress are not documented apply-policy direction keywords.
18. For application-aware routing, what are the default BFD app-route poll interval and the default multiplier?
- A. The poll interval is 24 hours and the multiplier is 12
- B. The poll interval is 10 minutes (600,000 ms) and the multiplier is 6(correct)
- C. The poll interval is 60 seconds and the multiplier is 1
- D. The poll interval is 1 second and the multiplier is 3
Explanation: The application-aware routing page gives the default poll interval as 10 minutes (600,000 ms) and the default multiplier as 6 (range 1 to 6); at the defaults, classification uses the last hour of data. Why the other options are wrong: A) 24 hours and a multiplier of 12 are not documented values; the multiplier range tops out at 6. C) These values are not the documented defaults. D) 1 second is the default BFD Hello interval, not the app-route poll interval, and 3 is not the multiplier default.
19. Which VPN ID can NOT be used for a service VPN according to the segmentation guide (valid service VPN IDs are 1 to 65525, excluding one reserved value)?
- A. 1
- B. 65525
- C. 100
- D. 512(correct)
Explanation: The guide states the service VPN range as 1 to 65525, excluding 512; VPN 512 is the management VPN. Why the other options are wrong: A) VPN 1 is within the valid range 1 to 65525 and is commonly used as a service VPN. B) 65525 is the upper bound of the valid range, so it is allowed. C) VPN 100 is within the valid range.
20. What is the default behavior of the zone-based firewall for traffic between two different zones when no policy allows it?
- A. Traffic is permitted only for TCP flows
- B. Traffic is inspected and permitted if the return flow is seen first
- C. Traffic is denied (the default policy between zones is deny all)(correct)
- D. Traffic is permitted and logged
Explanation: The firewall guide states that between zones the default policy is deny all, so traffic is blocked unless a policy explicitly allows it, and nonmatching flows are dropped by default. Why the other options are wrong: A) There is no protocol exception; the default between zones is deny all. B) Return flows are handled through session state when traffic is inspected; they do not override the default deny. D) The default is deny, not permit.
21. When QoS has not been configured for data traffic on a Catalyst SD-WAN IOS XE device, which queue does the forwarding and QoS guide say is the default queue?
- A. Queue 1
- B. Queue 7
- C. Queue 0
- D. Queue 2(correct)
Explanation: The forwarding and QoS guide states that when QoS is not configured for data traffic, queue 2 is the default queue. Why the other options are wrong: A) Queue 1 is one of the data queues but the guide names queue 2 as the default. B) Queue 7 is one of the data queues but is not the default queue. C) Queue 0 is reserved and is not the default data queue.
22. An administrator wants an IPS signature set that is less restrictive and gives better performance by imposing fewer rules. Which signature set should be chosen?
- A. Detection
- B. Balanced
- C. Connectivity(correct)
- D. Security
Explanation: The IPS guide describes Connectivity as designed to be less restrictive and provide better performance by imposing fewer rules. Why the other options are wrong: A) Detection is an inspection mode (intrusion detection), not a signature set. B) Balanced is designed to protect without a significant effect on performance, but it is not described as the least restrictive. D) Security provides more protection than Balanced with an impact on performance.
23. The same URL pattern is accidentally configured in both the allowed list and the blocked list of a URL filtering policy. What does Cisco state will happen to matching traffic?
- A. The traffic is allowed only if its web reputation is above the threshold
- B. The traffic is allowed(correct)
- C. The policy fails validation and cannot be saved
- D. The traffic is blocked
Explanation: The URL filtering guide states that if the same item is configured under both the allowed and blocked lists, the traffic is allowed. Why the other options are wrong: A) Allowed-list URLs skip category-based filtering; the reputation threshold does not override the allowed list. C) The guide does not describe a validation failure for this conflict; it states the traffic is allowed. D) Blocked-list precedence is not what the guide states; the allowed list wins in a conflict.
24. Which default user group on Catalyst SD-WAN IOS XE devices is non-configurable, includes the admin user by default, and is permitted to perform all operations?
- A. operator
- B. netadmin(correct)
- C. basic
- D. security_operations
Explanation: The RBAC guide states that netadmin is non-configurable, includes the admin user by default, and its users are permitted to perform all operations on the device. Why the other options are wrong: A) operator is designed for view-only users. C) basic is a configurable group that can be used for any users and privilege levels. D) security_operations is scoped to security policy, not to all operations.
25. A script calls the SD-WAN Manager REST API with session-based authentication. After logging in, it receives a JSESSIONID cookie. What does a typical POST request require in addition?
- A. The j_password sent in the body of every POST
- B. A new login for every request
- C. Nothing; the JSESSIONID cookie alone is always enough
- D. An XSRF prevention token in addition to the JSESSIONID cookie(correct)
Explanation: The API authentication page states that GET requests need only the JSESSIONID cookie, while POST requests typically require an XSRF token in addition to the JSESSIONID cookie. Why the other options are wrong: A) The username and password (j_username and j_password) are submitted once at login to obtain the session, not with every POST. B) Sharing the same session is mandatory when invoking multiple API requests sequentially, so a new login per request is wrong. C) That applies to GET requests; POST requests typically also need the XSRF token.