300-440 ENCC — Cisco Certified Specialist - Enterprise Cloud Connectivity
Test your knowledge with official exam-style questions
Questions and options are shuffled each attempt
Email me this practice set
Get a link sent to your inbox so you can pick this back up anytime.
▶Cisco Certified Specialist - Enterprise Cloud Connectivity — Practice Set 1: All Questions & Explanations
Full question text, answer options, and explanations for this practice set — a spoiler-free alternative is the interactive quiz above for scored, shuffled practice.
1. A branch office is being connected to an AWS VPC over the internet using native IPsec. The network team creates one Site-to-Site VPN connection that targets a virtual private gateway. How many tunnels does that single VPN connection provide, and how are they addressed on the AWS side?
- A. One active tunnel plus a hidden standby that shares the active tunnel's public IP address
- B. Two tunnels, each using a unique public IP address on the AWS side(correct)
- C. One tunnel; a second VPN connection must be created if redundancy is wanted
- D. Four tunnels, two in each of two Availability Zones
Explanation: AWS states that a Site-to-Site VPN connection offers two VPN tunnels between the virtual private gateway (or transit gateway) and the customer gateway, and that each tunnel uses a unique public IP address. AWS recommends configuring both tunnels for redundancy. Why the other options are wrong. A: Both tunnels are real, separately addressed tunnels, each with its own public IP address; there is no hidden standby that shares an address. C: AWS documents two tunnels per VPN connection, so a second connection is not needed just to get a redundant tunnel. D: AWS documents two tunnels per connection (each terminating in a different Availability Zone), not four.
2. A financial firm wants private connectivity from its data center to Azure that avoids the public internet. Which statement correctly describes Azure ExpressRoute?
- A. It is an IPsec tunnel that Azure VPN Gateway builds across the public internet
- B. It requires the customer to run Cisco SD-WAN edge routers inside every Azure virtual network
- C. It extends on-premises networks into the Microsoft cloud over a private connection through a connectivity provider, and it does not go over the public internet(correct)
- D. It provides only Layer 2 connectivity, so customers cannot use BGP with it
Explanation: Microsoft describes ExpressRoute as extending on-premises networks into the Microsoft cloud over a private connection with the help of a connectivity provider. ExpressRoute connections do not go over the public internet. Why the other options are wrong. A: That describes Azure VPN Gateway, which sends encrypted traffic over the public internet; ExpressRoute is the private-connection service. B: ExpressRoute is a provider-based circuit service; it does not require SD-WAN edge routers in the virtual networks. D: ExpressRoute offers Layer 3 connectivity and uses BGP to exchange routes between the customer network and Microsoft.
3. A company has no presence in a Google colocation facility, but a regional carrier it already uses is a supported Google service provider. The company needs private connectivity to its VPC networks. Which Google Cloud Interconnect option fits?
- A. Cross-Cloud Interconnect, because it connects an on-premises network to a VPC through a provider
- B. Dedicated Interconnect, because it is the only option that avoids the public internet
- C. Partner Interconnect, because it connects the on-premises and VPC networks through a supported service provider(correct)
- D. Classic VPN, because it provides a private physical connection to Google
Explanation: Google describes Partner Interconnect as connecting an on-premises network to VPC networks through a supported service provider. Dedicated Interconnect is a direct physical connection to the Google network. Why the other options are wrong. A: Cross-Cloud Interconnect links another cloud provider's network to VPC networks through a direct physical connection; it is not for on-premises sites. B: Dedicated Interconnect is a direct physical connection between the on-premises network and Google; it requires a direct physical link to Google, whereas Partner Interconnect reaches Google through a supported service provider, which is what this company can use. D: Classic VPN is a Cloud VPN gateway type that sends encrypted traffic over the internet; it is not a private physical connection.
4. An enterprise sends branch internet and SaaS traffic through Cisco Umbrella as the Secure Internet Gateway (SIG) provider, using the SIG feature template in Cisco SD-WAN Manager. Which automatic tunnel type does the SIG template support for Umbrella?
- A. Automatic GRE tunnels only
- B. Either automatic IPsec or automatic GRE tunnels
- C. Neither; Umbrella tunnels can only be built manually
- D. Automatic IPsec tunnels only(correct)
Explanation: Cisco's SIG documentation states that the SIG template supports automatic IPsec or GRE tunnels to Zscaler SIGs, and that Umbrella supports automatic IPsec only. Why the other options are wrong. A: Automatic GRE tunnels are listed for Zscaler, not for Umbrella. B: Choosing between automatic IPsec and GRE applies to Zscaler; for Umbrella the documentation says automatic IPsec only. C: Automatic tunnels are supported for Umbrella (IPsec); manual tunnels are an additional option, not the only one.
5. A bank needs AWS Direct Connect for critical workloads and wants the topology that targets a 99.99% SLA and survives a complete Direct Connect location failure. Which Resiliency Toolkit model should it order?
- A. Development and test
- B. Classic connection with a single dedicated port
- C. High resiliency
- D. Maximum resiliency(correct)
Explanation: AWS describes Maximum resiliency as separate connections that terminate on separate devices in more than one location, providing resiliency against device, connectivity, and complete location failures; the model is for an SLA of 99.99%. Why the other options are wrong. A: Development and test uses separate connections on separate devices in a single location and gives no resiliency against location failure. B: A single Classic connection does not use the Resiliency Toolkit models and provides no redundancy. C: High resiliency is the model for a 99.9% SLA, not 99.99%.
6. A retailer runs a production workload in Azure over a single ExpressRoute circuit in one peering location. The design review asks for maximum resiliency according to Microsoft guidance. What should be added?
- A. A second BGP session on the same circuit, since each circuit has only one connection to Microsoft
- B. A second private peering on the same circuit in the same location
- C. A second ExpressRoute circuit in a different peering location(correct)
- D. A site-to-site VPN replacing the circuit entirely
Explanation: Microsoft recommends that, for maximum resiliency, you establish a connection to two ExpressRoute circuits in two peering locations. A single circuit with redundant connections in one location is described as standard resiliency for non-critical workloads. Why the other options are wrong. A: Each circuit already has two connections to two Microsoft Enterprise edge routers; the recommendation for maximum resiliency is a second circuit in another location. B: A second peering in the same location does not protect against the loss of that peering location. D: Replacing the circuit with a VPN removes the private connection rather than adding resiliency; a VPN is only described as a possible failover path.
7. A data center needs a single AWS Site-to-Site VPN tunnel to carry up to 5 Gbps without building ECMP across many tunnels. The standard tunnel limit is 1.25 Gbps. Which design meets the need?
- A. Attach the VPN connection to a transit gateway (or Cloud WAN) and use Large Bandwidth Tunnels(correct)
- B. Attach the VPN connection to a virtual private gateway and enable Large Bandwidth Tunnels
- C. Keep standard tunnels; each one already carries up to 5 Gbps by default
- D. Use ECMP across the two tunnels of a connection on a virtual private gateway
Explanation: AWS documents Large Bandwidth Tunnels of up to 5 Gbps per tunnel, available only for VPN connections attached to a transit gateway or Cloud WAN; they are not supported for virtual private gateway attachments. Why the other options are wrong. B: Large Bandwidth Tunnels are not supported for virtual private gateway attachments. C: Standard bandwidth is up to 1.25 Gbps per tunnel; 5 Gbps requires Large Bandwidth Tunnels. D: ECMP is supported for Site-to-Site VPN connections on a transit gateway, but not on a virtual private gateway.
8. An engineer adds a network ACL rule that allows inbound TCP 443 to a subnet in AWS but does not add any outbound rule. Responses to clients are dropped. Which cloud-native behavior explains this?
- A. Network ACLs are stateless, so return traffic is not automatically allowed(correct)
- B. Security groups are stateless, so the instance security group dropped the reply
- C. Network ACLs only evaluate traffic that is routed within a subnet
- D. Network ACL rules are evaluated starting with the highest rule number
Explanation: AWS states that network ACLs are stateless: if a rule allows specific inbound traffic to a subnet, responses are not automatically allowed. Security groups, in contrast, are stateful. Why the other options are wrong. B: AWS documents security groups as stateful; responses to allowed inbound traffic are allowed regardless of outbound rules. C: AWS says network ACL rules are evaluated when traffic enters and leaves the subnet, not as it is routed within a subnet. D: AWS evaluates network ACL rules in order starting with the lowest numbered rule.
9. A Cisco IOS XE router is the customer gateway device for a new AWS Site-to-Site VPN connection using default settings. The tunnels stay down until someone sends traffic across them. According to AWS, why?
- A. Tunnels come up only after a static route is added to the AWS route table
- B. Tunnels remain down until BGP is configured, because IKE requires BGP
- C. By default the customer gateway device must bring up the tunnels by generating traffic and initiating IKE negotiation(correct)
- D. AWS never initiates IKE and also forbids customer-initiated negotiation
Explanation: AWS states that by default the customer gateway device must bring up the tunnels by generating traffic and initiating the IKE negotiation; the connection can be configured so that AWS initiates instead. Why the other options are wrong. A: Route-table entries are needed to steer traffic, but they are not what causes IKE to start; the customer gateway device initiates by default. B: IKE does not require BGP; static routing is also supported when the device does not support BGP. D: AWS can be configured to initiate IKE; the default is that the customer gateway device initiates.
10. A team will terminate an IKEv2 tunnel from an on-premises Cisco IOS XE router on Azure VPN Gateway. Based on the Azure default IPsec/IKE parameters, which VPN type should the gateway use?
- A. RouteBased, because it supports IKEv1 and IKEv2(correct)
- B. PolicyBased, because it supports DPD
- C. PolicyBased, because it supports IKEv1 and IKEv2
- D. Either type; the IKE version is identical for both
Explanation: Azure documents that the default IKE version is IKEv1 for PolicyBased gateways and IKEv1 and IKEv2 for RouteBased gateways. RouteBased also supports dead peer detection. Why the other options are wrong. B: Azure lists DPD as not supported for PolicyBased and supported for RouteBased. C: PolicyBased gateways use IKEv1 only in the default parameters. D: The IKE versions differ: PolicyBased is IKEv1 only, RouteBased is IKEv1 and IKEv2.
11. An engineer is preparing an on-premises router as the peer gateway for a Google Cloud HA VPN gateway. Which THREE requirements apply to the peer VPN gateway?
- A. It must use IKEv2 only because IKEv1 is not supported by Cloud VPN
- B. It must have a static external (internet-routable) IP address(correct)
- C. It must be configured with static routes only, because HA VPN does not support BGP
- D. It must be configured to support prefragmentation(correct)
- E. It must support dynamic BGP routing(correct)
Explanation: Google states that the peer VPN gateway must have a static external (internet-routable) IP address, that Cloud VPN requires the peer to support prefragmentation, and that for HA VPN the peer device must support dynamic BGP routing. Why the other options are wrong. A: Cloud VPN supports IKEv1 and IKEv2 with an IKE pre-shared key; IKEv2 is not exclusive (IPv6 traffic on HA VPN does require IKEv2). C: HA VPN supports only dynamic routing (BGP); static routing is the Classic VPN model.
12. An on-premises router must form an eBGP session with a cloud-hosted router, but the two peers are not directly connected. A path to the peer exists via a static route. What must be configured for the session to establish?
- A. The redistribute connected command under OSPF
- B. The neighbor next-hop-self command
- C. The neighbor ebgp-multihop command(correct)
- D. The no auto-summary command
Explanation: Cisco states that eBGP peers must be directly connected; if they are not, the neighbor ebgp-multihop command must be used and a path to the peer, via an IGP or static route, must exist. Why the other options are wrong. A: Redistribution into OSPF does not establish a BGP session. B: next-hop-self changes the next hop advertised to iBGP peers; it does not allow non-adjacent eBGP sessions. D: no auto-summary controls classful summarization of locally originated networks, not session establishment.
13. A cloud-edge IOS XE router redistributes static routes into OSPF with "redistribute static subnets" and does not specify a metric. What metric do the redistributed routes get?
- A. 10
- B. 0
- C. 1
- D. 20(correct)
Explanation: Cisco states that if a metric is not specified, OSPF uses a default value of 20 when redistributing routes from all protocols except BGP, which gets a metric of 1. Static routes therefore get 20. Why the other options are wrong. A: 10 is the example OSPF cost of Ethernet in the document, not the redistribution default. B: A metric of 0 is the default quoted for IS-IS redistribution when no metric is given, not OSPF. C: A default of 1 applies to redistributed BGP routes, not static routes.
14. A VPC route table has two routes for 172.31.0.0/24: one propagated from a virtual private gateway and one static route whose target is an internet gateway. Where does traffic to 172.31.0.0/24 go?
- A. To the internet gateway, because the static route takes priority over the propagated route(correct)
- B. Traffic is dropped because duplicate destinations are invalid
- C. To the virtual private gateway, because propagated routes always win
- D. Traffic is load-shared across both targets
Explanation: AWS states that if propagated routes have the same destination CIDR as existing static routes (so longest prefix match cannot be applied), the static routes are prioritized. Its example sends traffic for 172.31.0.0/24 to the internet gateway. Why the other options are wrong. B: Duplicate destinations are allowed; AWS gives the rule that decides which one wins. C: AWS says the static route is prioritized over the propagated route when the destinations are identical. D: AWS does not describe load-sharing between a static route and a propagated route; the static route is prioritized.
15. In Cisco Cloud OnRamp for Multicloud with AWS, what does the cloud gateway that Cisco SD-WAN Manager creates comprise?
- A. One VPN concentrator and a virtual private gateway
- B. A single Catalyst 8000V in the default VPC and an internet gateway
- C. Two Direct Connect locations and a Direct Connect gateway
- D. A transit VPC, two CSR devices, and a transit gateway(correct)
Explanation: The Cisco documentation states that a cloud gateway comprises a transit VPC, two CSR devices, and a transit gateway, all created by Cisco SD-WAN Manager when the account and region are chosen. Why the other options are wrong. A: A VPN concentrator and virtual private gateway are not the cloud gateway components in the documentation. B: The cloud gateway uses a pair of routers in a transit VPC with a transit gateway, not a single device in the default VPC. C: Direct Connect is not part of the cloud gateway definition.
16. An engineer maps two branch service VPNs that both use 10.10.0.0/16 to Azure VNets through Cloud OnRamp for Multicloud and Azure Virtual WAN. Why will this design be a problem?
- A. Segmentation is not supported in Azure Virtual WAN, so the VPNs mapped to VNet tags must not have overlapping IP address spaces(correct)
- B. VNet tags are not supported when Azure Virtual WAN is used
- C. Only one branch VPN may ever be configured per Cisco SD-WAN edge device
- D. Azure Virtual WAN hubs require IPv6 addressing for VPN mapping
Explanation: Cisco states that the VPNs selected to be mapped to VNet tags must not have overlapping IP addresses because segmentation is not supported in Microsoft Azure Virtual WAN. Why the other options are wrong. B: VNet tags are the mechanism used to map service VPNs to VNets in this integration. C: A branch device can have multiple VPNs; the limitation is overlapping address space. D: The integration states that IPv6 is not supported.
17. When two Catalyst 8000V instances are attached to the factory default template for a Cisco SD-WAN cloud gateway with Google Cloud, which TLOC color must not be specified for other interfaces?
- A. biz-internet
- B. private1(correct)
- C. mpls
- D. default
Explanation: Cisco documents that the TLOC color private1 is used only for site-to-site communication in the Google Cloud integration and should not be used for other interfaces. Why the other options are wrong. A: The documentation does not restrict biz-internet. C: The documentation does not restrict mpls. D: The documentation does not restrict the default color.
18. Which prerequisite does Cisco list to enable Cloud OnRamp for SaaS for Webex and Microsoft Office 365 applications?
- A. Every branch must have two WAN interfaces with the same color
- B. A Cisco Umbrella DNS-layer license must be installed
- C. Cisco SD-AVC must be enabled(correct)
- D. A Direct Connect gateway must exist in the tenant
Explanation: Cisco states that, to enable Cloud OnRamp for SaaS for Webex and Microsoft Office 365 applications, Cisco SD-AVC must be enabled. Why the other options are wrong. A: Two same-color WAN interfaces are not a prerequisite for SaaS. B: An Umbrella license is not listed as a prerequisite. D: Direct Connect gateways are an AWS construct unrelated to the SaaS prerequisite.
19. An architect writes a centralized control policy to steer overlay routes toward a hub. Where does the policy configuration live, and what is sent to the edge devices?
- A. It is installed on the cloud gateway only
- B. It stays on the Cisco SD-WAN Controller; only the results are distributed to devices through OMP(correct)
- C. It is pushed to every edge device as configuration and enforced locally
- D. It is applied on the ISP router and signalled using BGP communities
Explanation: Cisco states that centralized control policy is provisioned and applied only on the SD-WAN Controller; the configuration is never pushed to devices. What is pushed using OMP are the results, which devices install in their route tables. Why the other options are wrong. A: The policy is provisioned on the Controllers, not on the cloud gateway. C: The documentation says the control policy configuration itself is never pushed to local devices. D: The policy is not signalled through BGP communities on an ISP router.
20. A branch IOS XE SD-WAN router learns BGP routes from a local cloud-connected router and the team wants to filter them only on that device. Which policy type matches?
- A. Localized control policy (route policy)(correct)
- B. Centralized control policy applied outbound
- C. VPN membership policy
- D. Centralized data policy
Explanation: Cisco documents localized control policy, also called route policy, as affecting BGP and OSPF routing behavior on the site-local network, provisioned on the IOS XE SD-WAN device through CLI or a device template. Why the other options are wrong. B: Centralized control policy runs on the Controllers and affects overlay routing, not local BGP route filtering on one device. C: VPN membership policy controls which VPNs a device may receive routes for. D: Centralized data policy affects data traffic flow using matches such as the 6-tuple, not local BGP route filtering.
21. On an IOS XE router, show crypto isakmp sa lists the peer in state MM_NO_STATE and the log shows "Processing of Main Mode failed with peer". What does this indicate?
- A. The phase 2 transform set is missing
- B. The tunnel is healthy and idle
- C. The phase 1 (ISAKMP) policy does not match on both sides(correct)
- D. The crypto ACLs are not mirrored
Explanation: Cisco states that failure of main mode suggests the phase 1 policy does not match on both sides, and that MM_NO_STATE in show crypto isakmp sa means main mode has failed. Why the other options are wrong. A: A phase 2 transform mismatch appears as a "transform proposal not supported" error, after phase 1 succeeds. B: A healthy established ISAKMP SA is shown as QM_IDLE in the sample output. D: Mismatched ACLs produce proxy-identity errors rather than a main mode failure.
22. A site-to-site IPsec tunnel to a cloud-hosted Cisco router fails. The debug shows "IPSec(validate_transform_proposal): proxy identities not supported". What is the first thing to verify?
- A. The pre-shared keys on both peers
- B. That the access lists defining IPsec traffic on each peer mirror each other(correct)
- C. That a loopback is configured for BGP
- D. That the cloud router uses AES for the ISAKMP policy
Explanation: Cisco states this message appears in debugs if the access list for IPsec traffic does not match, and that the access lists on each peer need to mirror each other. Why the other options are wrong. A: A pre-shared key mismatch shows as a sanity check failure/malformed IKE message. C: BGP loopbacks are unrelated to this IPsec negotiation message. D: The message is about proxy identities (ACLs), not algorithm choice.
23. In show ip bgp output on an IOS XE router, a network has a next hop of 0.0.0.0. What does this mean?
- A. The prefix is unreachable
- B. The route is a default route from the ISP
- C. The prefix was learned from an iBGP peer with next-hop-self
- D. The network is locally originated through redistribution, a network command, or an aggregate command(correct)
Explanation: Cisco's BGP FAQ states that a network with a next hop of 0.0.0.0 is locally originated via redistribution of an IGP into BGP, or via a network or aggregate command. Why the other options are wrong. A: The FAQ does not describe 0.0.0.0 as an unreachable next hop. B: The FAQ does not tie 0.0.0.0 to a default route from an ISP. C: Routes learned from an iBGP peer show that peer's address as the next hop.
24. After upgrading Cisco SD-WAN Manager to release 17.18.1a or later, a new N4 cloud gateway in Google Cloud fails to come up; the cloud gateway rejects the bootstrap file. The older WAN, S2C, S2S, and IC VPCs have an MTU of 1460 bytes. What fixes this?
- A. Change the TLOC color to private1
- B. Update the MTU of the applicable VPCs to 1500 bytes using the GCP CLI before creating the N4 cloud gateway(correct)
- C. Reduce the MTU to 1400 bytes
- D. Enable site-to-site connectivity globally
Explanation: Cisco states that existing VPCs might have an MTU of 1460 bytes after an upgrade, that an N4 cloud gateway requires 1500, so it rejects the bootstrap file; the fix is to update the MTU to 1500 bytes with the GCP CLI before creating an N4 cloud gateway. Why the other options are wrong. A: private1 is reserved for site-to-site and is unrelated to bootstrap rejection. C: The N4 gateway requires an MTU of 1500, so lowering it makes the problem worse. D: Site-to-site setting does not change the VPC MTU.
25. Cisco SD-WAN Manager runs on an EC2 instance that uses Instance Metadata Service Version 2 (IMDSv2) and an attached IAM role. Cloud OnRamp for Multicloud cannot use the role credentials. What change does Cisco document?
- A. Enable the Enable Configuration Group option in Cloud Global Settings
- B. Remove the AWSNetworkManagerFullAccess permission from the role
- C. Delete the external ID from the trust policy
- D. Update the hop limit to 2(correct)
Explanation: Cisco states that if the EC2 instance hosting SD-WAN Manager uses IMDSv2, the hop limit needs to be updated to 2 so that the IAM role credentials can be retrieved; IMDSv1 instances do not need this step. Why the other options are wrong. A: Configuration groups control how devices are configured and have no effect on retrieving IAM role credentials from IMDSv2. B: AWSNetworkManagerFullAccess is one of the permissions Cisco lists as allowed for the role; removing it does not address credential retrieval. C: The external ID provided by SD-WAN Manager is required in the trust policy for the IAM role model.