Skip to main content
Practice set 1 is free for every certification. Unlock sets 2-5 for $10.
Practice Exam

300-215 CBRFIR — Cisco Certified Specialist - Cybersecurity Forensic Analysis and Incident Response

Test your knowledge with official exam-style questions

Questions25PassingPass/Fail (scaled score not published)Exam time90 min

Questions and options are shuffled each attempt

Email me this practice set

Get a link sent to your inbox so you can pick this back up anytime.

▶Cisco Certified Specialist - Cybersecurity Forensic Analysis and Incident Response — Practice Set 1: All Questions & Explanations

Full question text, answer options, and explanations for this practice set — a spoiler-free alternative is the interactive quiz above for scored, shuffled practice.

  1. 1. While reviewing a suspicious script, an analyst finds a long string made of letters, digits, "+" and "/" that ends in "==". The analyst suspects Base64. Which statement about Base64 per RFC 4648 is correct?

    • A. It maps every 8-bit octet to two hexadecimal characters.
    • B. It represents 24-bit input groups as four characters from a 64-character alphabet, using "=" for padding.(correct)
    • C. It encrypts data with a secret key so only the key holder can read it.
    • D. It produces a fixed-length, irreversible digest of the input.

    Explanation: RFC 4648 describes Base64 as turning each 24-bit input group (three 8-bit groups) into four 6-bit values, each mapped to a printable character from a 64-character alphabet, with "=" used for padding. It is an encoding, not a protection mechanism. Option A is incorrect: Two hexadecimal characters per octet describes Base16 ("hex") encoding, not Base64. Option C is incorrect: Base64 uses no key; anyone can decode it, which is why attackers use it only to hide content from casual inspection. Option D is incorrect: A fixed-length irreversible digest is what a hash function produces; Base64 is fully reversible.

  2. 2. A malware analyst drafts a YARA rule that defines two strings but forgets to add anything after them. The rule fails to compile. Which part of a YARA rule is always required?

    • A. The strings definition section
    • B. The meta description block
    • C. A hexadecimal string
    • D. The condition section(correct)

    Explanation: The YARA documentation states that the strings definition section can be omitted if the rule does not rely on any string, but the condition section is always required. Option A is incorrect: The strings section can be omitted when a rule does not rely on any string (for example a rule that tests only file size). Option B is incorrect: The documentation lists strings and condition as the two main sections; a descriptive block is not what makes a rule compile. Option C is incorrect: Hexadecimal strings are only one of several string types (text, hex, regular expression) and none is mandatory.

  3. 3. During a Windows investigation, an analyst suspects that a dropped executable has had its timestamps altered to blend in with files in the same folder. Which statement correctly describes how this is typically done and how the analyst can expose it?

    • A. $FILE_NAME is the attribute most commonly altered because it is what Explorer displays, so compare it with the file data stream.
    • B. $STANDARD_INFORMATION is most commonly altered because it can be changed at user level through API calls, so compare it with $FILE_NAME, which usually needs kernel interaction or a move/rename to change.(correct)
    • C. Timestomping only changes the file hash, so recomputing the hash reveals the change.
    • D. $STANDARD_INFORMATION can only be changed by the kernel, so any difference between $SI and $FN proves legitimate system activity.

    Explanation: MITRE ATT&CK explains that both $STANDARD_INFORMATION ($SI) and $FILE_NAME ($FN) record times in the MFT. $SI is shown to the user and is the most common target because it can be modified at user level through API calls, while $FN is handled by the kernel and typically requires kernel interaction or moving/renaming a file. Comparing $SI to $FN therefore exposes simple timestomping (attackers may "double timestomp" to defeat that comparison). Option A is incorrect: It is $SI, not $FN, that is displayed to the end user and most commonly modified. Option C is incorrect: Timestomping modifies timestamps (modify, access, create, change), not file contents, so the hash is unaffected. Option D is incorrect: The opposite is true: $SI can be changed at user level and $FN is the kernel-handled attribute; a mismatch is a lead, not proof of legitimacy.

  4. 4. An analyst has acquired a memory image from a suspect Windows host and wants a Volatility 3 plugin that lists process memory ranges that potentially contain injected code. Which plugin fits?

    • A. pstree
    • B. netscan
    • C. cmdline
    • D. malfind(correct)

    Explanation: The Volatility 3 documentation describes malfind as listing process memory ranges that potentially contain injected code. Option A is incorrect: pstree lists processes in a tree based on their parent process ID; it does not inspect memory regions for injected code. Option B is incorrect: netscan scans for network objects in the memory image. Option C is incorrect: cmdline lists process command-line arguments.

  5. 5. A company must investigate a compromise of workloads running in a multi-tenant public cloud. Which TWO challenges does NIST IR 8006 list for cloud forensic data collection?

    • A. Locating and collecting volatile data(correct)
    • B. Accessing the data of one tenant without breaching the confidentiality of other tenants(correct)
    • C. Hypervisors prevent any cloud evidence from being hashed for integrity checks
    • D. Chain of custody is unnecessary because provider logs are automatically trusted
    • E. Forensic artifacts always reside in one known, fixed location

    Explanation: NIST IR 8006 lists, among data collection challenges, locating and collecting volatile data and accessing the data of one tenant without breaching the confidentiality of other tenants (alongside data collection from virtual machines and the inability to image all artifacts). Option C is incorrect: This is not a listed challenge; NIST SP 800-86 says message digests should be used to ensure the integrity of all data acquired during forensic activity. Option D is incorrect: NIST IR 8006 lists accurate and secure provenance for preserving chain of custody as a challenge, not as unnecessary. Option E is incorrect: The opposite is true: locating forensic artifacts in large, distributed and dynamic systems is a listed challenge.

  6. 6. EDR telemetry shows powershell.exe fetched a file from the Internet and a new process started, yet a full disk scan finds no dropped executable. Which MITRE ATT&CK statement best explains this?

    • A. PowerShell can download and run executables, which can be executed from disk or in memory without touching disk.(correct)
    • B. PowerShell can only run scripts stored on local disk, so a missing file means nothing executed.
    • C. PowerShell cannot start executables, only cmdlets, so the process must be unrelated.
    • D. Remote PowerShell via Invoke-Command needs no administrator permissions, so it never leaves artifacts.

    Explanation: ATT&CK notes PowerShell may be used to download and run executables from the Internet, which can be executed from disk or in memory without touching disk, which is why a disk-only scan can miss fileless execution. Option B is incorrect: The technique page states execution can occur in memory without touching disk. Option C is incorrect: ATT&CK cites the Start-Process cmdlet as a way to run an executable. Option D is incorrect: ATT&CK states that administrator permissions are required to use PowerShell to connect to remote systems with Invoke-Command, and nothing says it avoids artifacts.

  7. 7. Threat hunters believe an intruder stored payloads in the WMI repository on a Windows server. Which on-host location should the responder collect to examine that fileless storage?

    • A. ~/.bash_history in the user home directory
    • B. %SystemRoot%\System32\Wbem\Repository(correct)
    • C. %SystemRoot%\System32\Config
    • D. C:\Windows\System32\winevt\logs\

    Explanation: MITRE ATT&CK identifies the WMI repository at %SystemRoot%\System32\Wbem\Repository as the physical location where activity involving WMI-based fileless storage leaves artifacts. Option A is incorrect: ~/.bash_history holds Linux/macOS shell command history, not Windows WMI data. Option C is incorrect: %SystemRoot%\System32\Config holds the physical Registry files, a different fileless storage location. Option D is incorrect: This folder stores Windows event log files, not the WMI repository.

  8. 8. A SOC wants a Sysmon event that reveals when one process creates a thread inside another process, a technique malware uses to inject code and hide in other processes. Which event ID is it?

    • A. Event ID 1: Process creation
    • B. Event ID 3: Network connection
    • C. Event ID 8: CreateRemoteThread(correct)
    • D. Event ID 22: DNSEvent (DNS query)

    Explanation: Sysmon documentation states that Event ID 8 (CreateRemoteThread) detects when a process creates a thread in another process, a technique used by malware to inject code and hide in other processes. Option A is incorrect: Event ID 1 records process creation with command line details, not thread creation in another process. Option B is incorrect: Event ID 3 logs TCP/UDP connections. Option D is incorrect: Event ID 22 is generated when a process executes a DNS query.

  9. 9. An analyst finds this line in a recovered script: Invoke-Command -ComputerName SRV02 -ScriptBlock { Start-Process C:\Temp\a.exe }. What kind of code is it?

    • A. Bash shell script
    • B. PowerShell script(correct)
    • C. Python script
    • D. YARA rule

    Explanation: Invoke-Command and Start-Process are PowerShell cmdlets; MITRE ATT&CK cites them as examples of PowerShell abuse (Start-Process runs an executable, Invoke-Command runs a command locally or on a remote computer). Option A is incorrect: Bash uses commands such as touch, rm and history, not Verb-Noun cmdlets with -ScriptBlock. Option C is incorrect: Python has no Invoke-Command or Start-Process built-ins. Option D is incorrect: A YARA rule is declared with the rule keyword and strings/condition sections.

  10. 10. An analyst must inspect only the first 100 packets of a saved capture file named incident.pcap without capturing live traffic. Which tcpdump command does this?

    • A. tcpdump -w incident.pcap -c 100
    • B. tcpdump -i incident.pcap -c 100
    • C. tcpdump -r incident.pcap -c 100(correct)
    • D. tcpdump -D incident.pcap -c 100

    Explanation: The tcpdump manual states that -r reads packets from a saved file and -c exits after receiving or reading count packets, so -r incident.pcap -c 100 reads the first 100 packets from the file. Option A is incorrect: -w writes captured packets to a file (a live capture), it does not read one. Option B is incorrect: -i selects a network interface, not a capture file. Option D is incorrect: -D prints the list of available capture interfaces.

  11. 11. A collector receives a syslog message whose PRI value is 34. Using RFC 5424 (Priority = Facility x 8 + Severity), which interpretation is valid?

    • A. Facility 4 (security/authorization), severity 3 (Error)
    • B. Facility 3 (system daemons), severity 10
    • C. Facility 2 (mail), severity 18
    • D. Facility 4 (security/authorization), severity 2 (Critical)(correct)

    Explanation: 34 = 4 x 8 + 2: facility 4 is security/authorization messages and severity 2 is Critical. Option A is incorrect: Facility 4 with severity 3 would produce a PRI of 35. Option B is incorrect: Severity values must be in the range 0 to 7, so severity 10 is invalid. Option C is incorrect: Severity 18 is outside the valid range of 0 to 7.

  12. 12. How does NIST SP 800-61 distinguish a precursor from an indicator?

    • A. A precursor is a sign that an incident may occur in the future; an indicator is a sign that an incident may have occurred or may be occurring now.(correct)
    • B. A precursor is a confirmed breach; an indicator is a suspected breach.
    • C. A precursor is a sign that an incident may have occurred; an indicator is a sign of a future incident.
    • D. Precursors come only from user reports; indicators come only from automated tools.

    Explanation: NIST SP 800-61 Rev. 2 defines a precursor as a sign that an incident may occur in the future and an indicator as a sign that an incident may have occurred or may be occurring now. Option B is incorrect: Neither term means a confirmed breach; even an accurate indicator does not necessarily prove an incident occurred. Option C is incorrect: This reverses the two definitions. Option D is incorrect: NIST notes signs can come from many automated and manual sources; the terms are defined by timing, not by source.

  13. 13. A firewall, an IDPS and a web server each logged the same attack, but their timestamps read 12:07:01, 12:10:35 and 11:07:06. Which action does NIST SP 800-61 recommend to make event correlation reliable?

    • A. Disable timestamps and correlate by log line number
    • B. Keep all host clocks synchronized, for example with NTP(correct)
    • C. Keep only the IDPS log and discard the others
    • D. Reduce logging detail on each device

    Explanation: NIST advises keeping all host clocks synchronized with a protocol such as NTP; event correlation is more complicated when devices report inconsistent clock settings, and consistent timestamps are preferable from an evidentiary standpoint. Option A is incorrect: Line numbers differ between systems and cannot align events in time. Option C is incorrect: NIST recommends correlating events among multiple indicator sources, not discarding sources. Option D is incorrect: Less detail makes correlation harder; the problem is inconsistent clocks.

  14. 14. An incident handler must pick a containment strategy for a compromised server. Which TWO are criteria NIST SP 800-61 lists for choosing it?

    • A. Need for evidence preservation(correct)
    • B. Service availability(correct)
    • C. The attacker's presumed nationality
    • D. The colour scheme of the affected application
    • E. The number of open tickets in the IT service queue

    Explanation: NIST lists criteria including potential damage to and theft of resources, need for evidence preservation, service availability, time and resources needed, effectiveness of the strategy, and duration of the solution. Option C is incorrect: Attacker nationality is not a listed criterion; NIST also cautions that attacker identification can be time-consuming and distract from containment. Option D is incorrect: Application appearance has no bearing on containment decisions. Option E is incorrect: The ticket queue is not a listed criterion.

  15. 15. An analyst wants to quickly cut a suspected infected laptop off from the network while the investigation continues. Which Cisco Secure Endpoint capability matches this need?

    • A. One-click isolation of an infected host(correct)
    • B. USB device control rules
    • C. Talos threat hunting mapped to MITRE ATT&CK
    • D. Cisco Duo user verification

    Explanation: The Cisco Secure Endpoint page lists automating threat responses with one-click isolation of an infected host. Option B is incorrect: USB device control restricts use to approved USB devices; it does not isolate a host. Option C is incorrect: Talos threat hunting is human-driven hunting that maps to ATT&CK; it is not host isolation. Option D is incorrect: Cisco Duo verifies user identity before granting application access.

  16. 16. Between March and June, waves of spear-phishing hit three European energy firms with a clear objective of stealing grid schematics. Which STIX 2.1 object groups these malicious activities occurring over a period of time against a specific set of targets?

    • A. Observed Data
    • B. Indicator
    • C. Intrusion Set
    • D. Campaign(correct)

    Explanation: STIX defines a Campaign as a grouping of adversarial behaviors describing a set of malicious activities or attacks (sometimes called waves) that occur over a period of time against a specific set of targets, usually with well-defined objectives. Option A is incorrect: Observed Data is raw information about entities such as IPs or files, with no context for what it means. Option B is incorrect: An Indicator contains a pattern used to detect suspicious or malicious activity. Option C is incorrect: An Intrusion Set is a grouped set of behaviors and resources believed to be orchestrated by a single organization and may span multiple Campaigns; the scenario describes time-bounded waves against specific targets.

  17. 17. An analyst needs the WHOIS record, passive DNS history and a risk score for a suspicious domain seen in proxy logs. Which Cisco capability provides these views?

    • A. Cisco Umbrella Investigate(correct)
    • B. Cisco Secure Endpoint USB device control
    • C. Cisco pxGrid Cloud
    • D. Cisco Secure Network Analytics encrypted traffic analytics

    Explanation: The Cisco Umbrella Investigate documentation includes topics on passive DNS, WHOIS record information, the Investigate domain summary and the domain risk score. Option B is incorrect: USB device control restricts approved USB devices. Option C is incorrect: pxGrid Cloud shares contextual information between on-premises applications and cloud-based solutions. Option D is incorrect: Encrypted traffic analytics identifies and isolates threats in encrypted traffic; it is not a domain-intelligence lookup.

  18. 18. An Apache access log line reads: 198.51.100.23 - - [17/Oct/2026:08:14:02 +0000] "GET /cgi-bin/search.cgi?q=%27+OR+1%3D1-- HTTP/1.1" 500 1873. What does the value 500 represent?

    • A. The size of the object returned to the client in bytes
    • B. The status code sent to the client; the 5xx class indicates an error on the server(correct)
    • C. The identity of the client determined by identd
    • D. The user ID from HTTP authentication

    Explanation: In the Apache Common Log Format the field after the request line is the status code (%>s). Codes beginning with 5 indicate an error in the server; the following value (1873) is the object size in bytes. Option A is incorrect: The size (%b) is the last field, 1873 here. Option C is incorrect: The RFC 1413 identity (%l) is the second field and shows a hyphen when unavailable. Option D is incorrect: The authenticated user ID (%u) is the third field, also a hyphen here.

  19. 19. An NGINX server is configured with: access_log /var/log/nginx/access.log.gz combined gzip flush=5m; During a live incident the analyst wants to read the log without stopping NGINX. What does the NGINX documentation say about reading it?

    • A. The buffered data is compressed in atomic blocks, so the file can be read by zcat at any time.(correct)
    • B. The file cannot be read until all worker processes are shut down.
    • C. The file must be converted with tcpdump before it can be read.
    • D. The gzip parameter makes NGINX stop logging until the file is rotated.

    Explanation: The ngx_http_log_module documentation states that when the gzip parameter is used, buffered data is compressed in atomic blocks, so the log file can be decompressed or read by zcat at any time. Note that with flush=5m the newest entries may not yet have been written. Option B is incorrect: Shutdown flushes buffered data, but the documentation says the file can be read at any time. Option C is incorrect: tcpdump handles packet captures, not NGINX log files. Option D is incorrect: Nothing in the documentation says gzip stops logging; it only compresses buffered data before writing.

  20. 20. In Wireshark an analyst wants to show only TCP packets that have the SYN flag set, to spot a scan. Which display filter is correct?

    • A. tcp.flags.syn
    • B. tcp.flags.syn == 0
    • C. tcp.flags.syn == 1(correct)
    • D. tcp.flags.fin == 1

    Explanation: Wireshark documents that a Boolean field is present regardless of its value, so tcp.flags.syn alone matches every TCP packet containing the flag. To match only packets with the SYN flag set, use tcp.flags.syn == 1 (or == True). Option A is incorrect: The bare field name matches all TCP packets that contain the flag field, whether the SYN bit is 0 or 1. Option B is incorrect: This selects TCP packets where SYN is clear. Option D is incorrect: This selects packets with the FIN flag set, not SYN.

  21. 21. An analyst wants objdump to display assembler mnemonics only for the sections of an ELF binary that are expected to contain instructions. Which option is used?

    • A. -x (all headers)
    • B. -s (full contents)
    • C. -t (symbol table)
    • D. -d (disassemble)(correct)

    Explanation: The objdump manual states that -d (--disassemble) displays the assembler mnemonics for the machine instructions, disassembling only those sections expected to contain instructions. Option A is incorrect: -x displays all available header information, including the symbol table and relocation entries. Option B is incorrect: -s displays the full contents of sections. Option C is incorrect: -t prints the symbol table entries.

  22. 22. A team has contained and eradicated a malware outbreak and returned affected systems to service. Which activity from NIST SP 800-61 belongs to the post-incident phase that follows?

    • A. Acquire, preserve and document evidence
    • B. Hold a lessons learned meeting within several days of the end of the incident(correct)
    • C. Determine whether an incident has occurred
    • D. Contain the incident

    Explanation: NIST places follow-up reporting and lessons learned meetings in post-incident activity; the meeting should be held within several days of the end of the incident. Option A is incorrect: Acquiring, preserving and documenting evidence is part of containment, eradication and recovery. Option C is incorrect: Determining whether an incident has occurred belongs to detection and analysis. Option D is incorrect: Containment happens before eradication and recovery.

  23. 23. Which description matches the standard operating procedures (SOPs) that NIST SP 800-61 says an incident response team should maintain?

    • A. The specific technical processes, techniques, checklists and forms used by the incident response team, tested for accuracy and usefulness(correct)
    • B. A statement of management commitment and the purpose of the policy
    • C. A roadmap for maturing the incident response capability
    • D. A list of laws that apply to evidence collection

    Explanation: NIST describes SOPs as a delineation of the specific technical processes, techniques, checklists and forms used by the incident response team, based on the policy and plan, tested to validate accuracy and usefulness, and distributed to team members. Option B is incorrect: Management commitment and purpose are policy elements. Option C is incorrect: A maturity roadmap is a plan element. Option D is incorrect: SOPs are operational procedures, not a catalogue of laws.

  24. 24. Which statement about TAXII 2.1 is correct?

    • A. It is an application layer protocol for exchanging cyber threat intelligence over HTTPS and is designed to support intelligence represented in STIX.(correct)
    • B. It is the language used to describe the content of indicators, and STIX is the protocol that transports it.
    • C. It is a Cisco-proprietary replacement for pxGrid.
    • D. It is a packet capture format used by Wireshark.

    Explanation: The TAXII 2.1 specification describes it as an application layer protocol used to exchange cyber threat intelligence over HTTPS, defining Collections and Channels, and specifically designed to support the exchange of CTI represented in STIX. Option B is incorrect: This reverses the roles: STIX represents the intelligence and TAXII transports it. Option C is incorrect: TAXII is an OASIS standard, not a Cisco product. Option D is incorrect: TAXII is not a capture file format.

  25. 25. An ad-hoc scan of an endpoint collects tens of thousands of files. According to NIST SP 800-86, what is a sound next step to reduce the set the analyst must review?

    • A. Compare file hashes with validated hash sets such as NIST NSRL to set aside known benign files and identify known files(correct)
    • B. Delete every file with an unfamiliar extension
    • C. Open each document in an office suite on the production network
    • D. Execute each binary on a production server to observe behaviour

    Explanation: NIST SP 800-86 advises using validated hash sets, such as those from NIST's National Software Reference Library, as a basis for identifying known benign and malicious files, eliminating known good OS and application files from consideration. Option B is incorrect: Deleting files destroys evidence and an extension alone says nothing about maliciousness. Option C is incorrect: Opening untrusted documents on the production network risks further compromise. Option D is incorrect: Executing unknown binaries on production risks further damage; analysis belongs in controlled environments.