Skip to main content
Practice set 1 is free for every certification. Unlock sets 2-5 for $10.
Practice Exam

350-201 CBRCOR — Cisco Certified Specialist - Cybersecurity Core

Test your knowledge with official exam-style questions

Questions25PassingPass/Fail (scaled score not published)Exam time120 min

Questions and options are shuffled each attempt

Email me this practice set

Get a link sent to your inbox so you can pick this back up anytime.

▶Cisco Certified Specialist - Cybersecurity Core — Practice Set 1: All Questions & Explanations

Full question text, answer options, and explanations for this practice set — a spoiler-free alternative is the interactive quiz above for scored, shuffled practice.

  1. 1. A new SOC analyst is told to structure the team runbook around the incident response life cycle in NIST SP 800-61 Rev. 2. Which option lists the four major phases of that life cycle in order?

    • A. Prevention; Detection; Response; Recovery
    • B. Detection; Triage; Eradication; Reporting
    • C. Preparation; Identification; Containment; Lessons Learned; Closure
    • D. Preparation; Detection and Analysis; Containment, Eradication, and Recovery; Post-Incident Activity(correct)

    Explanation: NIST SP 800-61 Rev. 2 describes the life cycle as Preparation, Detection and Analysis, Containment, Eradication, and Recovery, and Post-Incident Activity. Option A is incorrect: This is a generic prevent/detect/respond/recover model, not the NIST SP 800-61 life cycle. Option B is incorrect: These are not the phase names used by NIST SP 800-61 Rev. 2 and the list omits preparation and post-incident activity. Option C is incorrect: This list has five invented stages and does not match the four phases NIST defines.

  2. 2. While reviewing web server logs, an analyst finds entries showing that a vulnerability scanner was run against the organization's public site. No compromise has been observed. How does NIST SP 800-61 Rev. 2 classify this sign?

    • A. Neither, because scanner activity is always benign
    • B. An indicator, because it proves an incident is in progress
    • C. A precursor, because it is a sign that an incident may occur in the future(correct)
    • D. A confirmed incident that moves straight to eradication

    Explanation: NIST SP 800-61 Rev. 2 defines a precursor as a sign that an incident may occur in the future and lists web server log entries showing the use of a vulnerability scanner as an example. Option A is incorrect: NIST specifically lists scanner usage as a precursor, so it should not be dismissed as benign. Option B is incorrect: An indicator is a sign that an incident may have occurred or may be occurring now. Scanner entries alone do not show that. Option D is incorrect: Nothing in the log shows a compromise, so eradication would be premature. NIST says that detected precursors may allow the organization to prevent an incident by altering its security posture.

  3. 3. A risk analyst is asked how risk should be expressed in an assessment report that follows NIST SP 800-30 Rev. 1. Which statement matches that publication?

    • A. Risk exists only when a threat source has been positively identified by name
    • B. Risk is the total number of vulnerabilities found by a scanner
    • C. Risk is typically a function of the adverse impacts that would arise if an event occurs and the likelihood of that event occurring(correct)
    • D. Risk is the CVSS Base score of the most severe vulnerability on the asset

    Explanation: NIST SP 800-30 Rev. 1 describes risk as a measure of the extent to which an entity is threatened by a potential circumstance or event, typically a function of the adverse impacts if it occurs and the likelihood of occurrence. Option A is incorrect: NIST ties risk to impact and likelihood. It does not require a named threat source. Option B is incorrect: A vulnerability count says nothing about impact or likelihood, so it is not a risk measure under NIST. Option D is incorrect: A CVSS score measures the severity of a vulnerability and leaves out other factors such as threat likelihood and asset impact.

  4. 4. A development team deploys its own application code onto a cloud provider's platform, using languages, libraries, and tools that the provider supports. The team does not manage the network, servers, operating systems, or storage. Which NIST service model does this describe?

    • A. Community cloud
    • B. Infrastructure as a Service (IaaS)
    • C. Software as a Service (SaaS)
    • D. Platform as a Service (PaaS)(correct)

    Explanation: In NIST SP 800-145, PaaS lets the consumer deploy consumer-created or acquired applications built with provider-supported languages, libraries, services, and tools. The consumer does not manage the network, servers, operating systems, or storage but controls the deployed applications. Option A is incorrect: Community cloud is a deployment model, not a service model, and the question asks for a service model. Option B is incorrect: In IaaS the consumer controls operating systems, storage, and deployed applications, so the team would be managing the OS. Option C is incorrect: In SaaS the consumer uses the provider's applications and does not deploy its own application code.

  5. 5. A retailer must identify which standard applies to all entities that store, process, or transmit cardholder data and sets baseline technical and operational requirements for protecting payment account data. Which standard is this?

    • A. PCI DSS(correct)
    • B. Sarbanes-Oxley Act
    • C. GDPR Article 33
    • D. ISO/IEC 27001

    Explanation: The PCI Security Standards Council describes PCI DSS as a baseline of technical and operational requirements designed to protect payment account data, applying to entities that store, process, or transmit cardholder data. Option B is incorrect: The Sarbanes-Oxley rulemaking covers financial reporting topics such as internal control over financial reporting and auditor independence. Option C is incorrect: GDPR Article 33 covers notifying a supervisory authority of a personal data breach. It is not a payment-card security standard. Option D is incorrect: ISO/IEC 27001 specifies an information security management system and is not specific to payment account data.

  6. 6. A threat hunter is mapping observed behavior to MITRE ATT&CK. Which statement correctly distinguishes tactics from techniques?

    • A. Tactics are the observed real-world implementations, and techniques are the abstract categories
    • B. Tactics and techniques are two names for the same level of detail
    • C. Tactics are the specific tools an adversary used, and techniques are the adversary goals
    • D. Tactics represent the "why" of an action, and techniques represent "how" an adversary achieves that goal(correct)

    Explanation: MITRE ATT&CK states that tactics represent the "why" of a technique or sub-technique (the adversary goal), while techniques represent "how" an adversary achieves a tactical goal by performing an action. Option A is incorrect: Observed real-world implementations are what ATT&CK calls procedures, not tactics. Option B is incorrect: ATT&CK treats them as different levels. A tactic is the goal and a technique is the method. Option C is incorrect: This reverses the definitions. A tactic is the goal, not the tool.

  7. 7. A vendor announces that a vulnerability in the organization's VPN gateway is being actively exploited. No patch exists yet, but the vendor has published a configuration workaround that disables the affected feature. Which NIST SP 800-40 Rev. 4 risk response scenario applies?

    • A. Routine patching
    • B. Emergency mitigation(correct)
    • C. Emergency patching
    • D. Unpatchable assets

    Explanation: NIST SP 800-40 Rev. 4 defines emergency mitigation as the emergency procedure used in a crisis to temporarily mitigate vulnerabilities before a patch is available, for example by deactivating functionality, and plans should replace it with a permanent fix later. Option A is incorrect: Routine patching handles patches on a regular release cycle that have not been elevated to emergency status. There is no patch here. Option C is incorrect: Emergency patching requires a patch to deploy. Here none exists yet. Option D is incorrect: Unpatchable assets refers to systems that cannot be patched in a reasonable time frame, such as end-of-life devices. Here a patch is simply not yet available.

  8. 8. A hardening checklist for a new single-purpose server includes Telnet and FTP, which the application does not need. According to NIST SP 800-123, why is removing an unneeded service preferable to merely disabling it through configuration?

    • A. Disabled services continue to consume licenses, which raises cost
    • B. Removed components cannot be reactivated by an attacker who alters settings, and disabled services could be enabled inadvertently through human error(correct)
    • C. Disabled services are automatically re-enabled by every operating system patch
    • D. Removal is faster because it never requires a reboot

    Explanation: NIST SP 800-123 states that removing unnecessary services and applications is preferable to disabling them through configuration settings because attacks that alter settings and activate a disabled service cannot succeed when the functional components are completely removed, and disabled services could also be enabled inadvertently through human error. Option A is incorrect: NIST does not give licensing cost as the reason. Option C is incorrect: NIST does not state that patches re-enable disabled services. Option D is incorrect: NIST does not claim removal avoids reboots. Its reasoning is about attack and error resistance.

  9. 9. A malware outbreak is spreading among user workstations. The network team previously placed servers and workstations on separate subnets. According to NIST SP 800-83 Rev. 1, what benefit does this design provide during containment?

    • A. It removes the need for endpoint antivirus software
    • B. It lets the infected workstation subnets be isolated while server subnets keep serving external customers and uninfected internal subnets(correct)
    • C. It prevents workstations from ever becoming infected
    • D. It guarantees that the malware cannot use email as a propagation channel

    Explanation: NIST SP 800-83 Rev. 1 gives this exact example: with servers and workstations on separate subnets, infected workstation subnets can be isolated from the main network while server subnets continue to provide functionality to customers and to uninfected internal subnets. Option A is incorrect: NIST presents segmentation as a containment aid, not as a replacement for other controls. Option C is incorrect: Segmentation limits spread and eases containment. It does not prevent infection. Option D is incorrect: Separate subnets do not stop a specific propagation channel such as email, and NIST makes no such claim.

  10. 10. A DevSecOps team wants a pipeline stage that identifies open-source and third-party components in an application, reports their known vulnerabilities, and flags problematic license restrictions. Which application security testing tool category matches this requirement?

    • A. Dynamic application security testing (DAST)
    • B. Interactive application security testing (IAST)
    • C. Static application security testing (SAST)
    • D. Software composition analysis (SCA)(correct)

    Explanation: NIST SP 800-204C describes SCA tools as those used to identify open-source and third-party components in an application, their known security vulnerabilities, and typically adversarial license restrictions. Option A is incorrect: DAST analyzes applications in their running state by simulating attacks. It is not a component and license inventory. Option B is incorrect: IAST combines elements of DAST with instrumentation of the application under test, typically through an agent in the test runtime. Option C is incorrect: SAST analyzes an application's source, bytecode, or binary code for vulnerabilities. It is not described as inventorying third-party components and licenses.

  11. 11. A SOC wants its TIP to ingest threat intelligence from a partner automatically. Which pairing correctly describes STIX and TAXII?

    • A. STIX is a transport protocol and TAXII is the data model
    • B. STIX is a vulnerability scoring system and TAXII is a packet capture format
    • C. STIX is a language and serialization format for CTI, and TAXII is an application layer protocol used to exchange CTI over HTTPS(correct)
    • D. Both STIX and TAXII are encryption algorithms for protecting CTI

    Explanation: The OASIS documentation defines STIX as a language and serialization format used to exchange cyber threat intelligence, and TAXII 2.1 as an application layer protocol used to exchange CTI over HTTPS, specifically designed to support exchange of CTI represented in STIX. Option A is incorrect: This reverses the roles. STIX is the content format and TAXII is the transport. Option B is incorrect: STIX describes threat intelligence objects, not scores, and TAXII is a sharing protocol, not a capture format. Option D is incorrect: Neither is an encryption algorithm. TAXII runs over HTTPS but is an exchange protocol.

  12. 12. In Wireshark, an analyst wants to show only HTTP requests to or from the host 192.168.0.1 in a large capture. Which display filter expression does that?

    • A. ip.addr==192.168.0.1 and http.request(correct)
    • B. ip.addr==192.168.0.1 or http.request
    • C. http.request contains 192.168.0.1
    • D. ip.addr=192.168.0.1 & http.request

    Explanation: The Wireshark User Guide shows ip.addr==192.168.0.1 for packets to or from an address, http.request to match packets containing that field, and and (or &&) to combine conditions so both must be true. Option B is incorrect: "or" shows every packet that matches either condition, so it would also show all HTTP requests from other hosts and all other traffic of 192.168.0.1. Option C is incorrect: "contains" tests for a substring in a field. It does not combine a host match with the protocol field filter. Option D is incorrect: A single = and a single & are not the documented comparison and logical operators. The documented forms are == or eq, and && or and.

  13. 13. Which description matches how the NIST glossary (citing CNSSI 4009) frames data loss prevention in terms of data states?

    • A. A capability limited to encrypting backups of data at rest
    • B. A capability limited to filtering inbound packets for malware signatures
    • C. A capability limited to monitoring logins to privileged accounts
    • D. A capability to identify, monitor, and protect data in use, data in motion, and data at rest(correct)

    Explanation: The NIST glossary (CNSSI 4009) describes DLP as a system's ability to identify, monitor, and protect data in use (for example endpoint actions), data in motion, and data at rest, using deep packet content inspection and contextual analysis within a centralized management framework. Option A is incorrect: DLP covers more than backup encryption and addresses all three data states. Option B is incorrect: Inbound malware filtering is an anti-malware function. DLP is concerned with identifying and protecting sensitive data. Option C is incorrect: Privileged login monitoring is an identity control and is not the data-state definition of DLP.

  14. 14. During a threat modeling workshop, an engineer notes that an attacker could lock a legitimate user out of an account by submitting many failed authentication attempts. Which STRIDE category does the OWASP Threat Modeling Cheat Sheet associate with this example?

    • A. Spoofing
    • B. Denial of Service(correct)
    • C. Tampering
    • D. Information Disclosure

    Explanation: The OWASP cheat sheet lists locking a legitimate user out of their account by performing many failed authentication attempts as its example of Denial of Service, which violates availability. Option A is incorrect: Spoofing violates authentication, for example stealing a token to impersonate a user. Here the attacker is not impersonating anyone. Option C is incorrect: Tampering violates integrity, for example making unintended database updates. Nothing is altered here. Option D is incorrect: Information Disclosure violates confidentiality, for example extracting data from a database. No data is exposed here.

  15. 15. An incident handler must transfer a compromised laptop to the legal team for possible litigation. According to NIST SP 800-61 Rev. 2, what should document this transfer?

    • A. A chain of custody form that details the transfer and includes each party's signature(correct)
    • B. A note in the SIEM that the host was reimaged
    • C. An email from the help desk to the system owner
    • D. A verbal confirmation recorded in the chat channel

    Explanation: NIST SP 800-61 Rev. 2 says evidence should be accounted for at all times and that whenever evidence is transferred from person to person, chain of custody forms should detail the transfer and include each party's signature. Option B is incorrect: Reimaging would destroy the evidence, and a SIEM note is not a chain of custody record. Option C is incorrect: An informal email does not record each party's signature or the evidence handling details NIST lists. Option D is incorrect: A verbal confirmation is not a signed record and would not satisfy the documentation NIST describes.

  16. 16. In the four-phase forensic process in NIST SP 800-86, which phase is described as executing forensic tools and techniques suited to the collected data types to identify and extract relevant information while protecting its integrity?

    • A. Examination(correct)
    • B. Reporting
    • C. Analysis
    • D. Collection

    Explanation: NIST SP 800-86 defines the phases as collection, examination, analysis, and reporting. In examination, forensic tools and techniques appropriate to the collected data are executed to identify and extract the relevant information while protecting its integrity. Option B is incorrect: Reporting presents the results of the analysis and may recommend improvements to policies, tools, and procedures. Option C is incorrect: Analysis derives useful information from the results of examination to answer the questions that prompted the work. Option D is incorrect: Collection is where data related to a specific event is identified, labeled, recorded, and collected with its integrity preserved.

  17. 17. An analyst plans to detonate a suspicious attachment repeatedly in an isolated environment and wants every run to start from a clean state. Which property of a sandbox, as described in NIST SP 800-83 Rev. 1, supports this?

    • A. The sandbox automatically submits samples to antivirus vendors
    • B. The sandbox can be reset to a known good state every time it is initialized(correct)
    • C. The sandbox permits applications to share memory with other host applications
    • D. The sandbox gives applications unrestricted access to the host file system

    Explanation: NIST SP 800-83 Rev. 1 describes a sandbox as a controlled environment that restricts the operations applications can perform and isolates them from the host, and notes that the sandbox itself can be reset to a known good state every time it is initialized. Option A is incorrect: NIST does not describe automatic vendor submission as a sandbox property. Option C is incorrect: A sandbox isolates its applications from the host's other applications and does not share memory with them. Option D is incorrect: A sandbox restricts access to system resources such as memory and the file system. Unrestricted host access would defeat its purpose.

  18. 18. An analyst has a packet capture in which a workstation downloaded an executable over HTTP. The analyst wants to save the reassembled file to disk for further analysis. Which Wireshark function is designed for this?

    • A. Sorting the packet list by length
    • B. File > Export Objects (for example, HTTP)(correct)
    • C. A display filter such as ip.addr==192.168.0.1
    • D. Printing the packet list to a PDF

    Explanation: The Wireshark User Guide explains that Export Objects allows the user to export reassembled objects, such as HTML documents, images, and executables transferred over HTTP, to disk. Option A is incorrect: Sorting changes the order of the displayed packets and extracts nothing. Option C is incorrect: A display filter only controls which packets are shown. It does not extract files. Option D is incorrect: A printout of the packet list does not reconstruct the transferred file.

  19. 19. An investigation confirms that an attacker accessed and exfiltrated a database of employee names, home addresses, and national ID numbers. Using the example information impact categories in NIST SP 800-61 Rev. 2, which category fits best?

    • A. Integrity Loss
    • B. Proprietary Breach
    • C. Privacy Breach(correct)
    • D. None

    Explanation: NIST SP 800-61 Rev. 2 defines Privacy Breach as sensitive personally identifiable information of taxpayers, employees, beneficiaries, and similar groups being accessed or exfiltrated. Option A is incorrect: Integrity Loss means sensitive or proprietary information was changed or deleted. The scenario describes exfiltration. Option B is incorrect: Proprietary Breach covers unclassified proprietary information being accessed or exfiltrated, not PII of employees. Option D is incorrect: None means no information was exfiltrated, changed, deleted, or otherwise compromised, which contradicts the scenario.

  20. 20. A vulnerability advisory lists a CVSS v3.1 Base score of 8.1. Under the CVSS v3.1 qualitative severity rating scale, how is this vulnerability rated?

    • A. High(correct)
    • B. Critical
    • C. Low
    • D. Medium

    Explanation: The CVSS v3.1 specification maps 7.0 to 8.9 to High. Medium is 4.0 to 6.9, Critical is 9.0 to 10.0, and Low is 0.1 to 3.9. Option B is incorrect: Critical starts at 9.0, so 8.1 does not reach it. Option C is incorrect: Low covers scores from 0.1 to 3.9, far below 8.1. Option D is incorrect: Medium covers scores from 4.0 to 6.9, so 8.1 is above it.

  21. 21. A script calls a REST API and receives a 401 response that includes a WWW-Authenticate header. What does this status code indicate?

    • A. The server did not find a current representation for the resource or is unwilling to disclose that one exists
    • B. The client sent too many requests in a given time
    • C. The request lacks valid authentication credentials for the target resource(correct)
    • D. The server received an invalid response from an upstream gateway

    Explanation: RFC 9110 defines 401 (Unauthorized) as the request lacking valid authentication credentials for the target resource, and requires the server to send a WWW-Authenticate header with at least one applicable challenge. Option A is incorrect: That describes a 404 response, not a 401. Option B is incorrect: Too many requests in a given time is the 429 status code from RFC 6585. Option D is incorrect: An invalid response from an inbound server is a 502 Bad Gateway.

  22. 22. A nightly enrichment script receives HTTP 429 Too Many Requests with a Retry-After: 3600 header after querying a threat intelligence API in a tight loop. What is the correct way for the script to handle this?

    • A. Switch the request method from GET to POST to avoid the limit
    • B. Pause requests for the period in Retry-After before making a new request(correct)
    • C. Retry immediately in a tighter loop until the request succeeds
    • D. Treat the response as a permanent failure and delete the API key

    Explanation: RFC 6585 defines 429 as the user having sent too many requests in a given amount of time (rate limiting) and says the response may include a Retry-After header indicating how long to wait before making a new request. Option A is incorrect: Changing the method does not change how many requests the client sends and does not honor the Retry-After instruction. Option C is incorrect: Retrying immediately keeps exceeding the limit and ignores the wait time the server asked for. Option D is incorrect: 429 signals rate limiting, not a revoked credential, so deleting the key is unwarranted.

  23. 23. A Python script uses the requests library to call an API with r = requests.get(url, timeout=10). The analyst wants an exception to be raised automatically if the server returns a 4xx or 5xx status. Which call does this?

    • A. r.encoding
    • B. r.raise_for_status()(correct)
    • C. r.headers
    • D. r.json()

    Explanation: The Requests documentation states that for a 4xx client error or 5xx server error, Response.raise_for_status() raises an HTTPError, and that a successful r.json() call does not indicate a successful response. Option A is incorrect: r.encoding is the text encoding Requests guessed and has no bearing on the status code. Option C is incorrect: r.headers returns the response headers and does not raise an exception for error status codes. Option D is incorrect: r.json() only decodes the body and can succeed on error responses, because some servers return JSON error details with HTTP 500.

  24. 24. An analyst sets an API token in a Bash session and then launches a Python enrichment script that reads the token from its environment. Which command makes the variable available to the script as a child process?

    • A. cd API_TOKEN
    • B. export -n API_TOKEN
    • C. export API_TOKEN=abc123(correct)
    • D. API_TOKEN=abc123 entered on its own line, with no other command

    Explanation: The Bash manual says export marks each name to be passed to subsequently executed commands in the environment, and that executed commands inherit the environment. Option A is incorrect: cd changes the working directory and does not set any variable. Option B is incorrect: export -n removes the export marking, so it would stop the variable from being passed. Option D is incorrect: A plain assignment creates a shell variable that is not marked for export, so subsequently executed commands do not receive it.

  25. 25. A security architect reviews a proposal to provision cloud networks by writing declarative definitions that a configuration management tool turns into the running platform. Which practice does NIST SP 800-204C recommend for such infrastructure as code?

    • A. Edit it directly on production hosts so that changes take effect immediately
    • B. Store it only in email attachments so that auditors can find it
    • C. Manage it like application source code: versioned, documented, and protected with access controls(correct)
    • D. Keep it outside source control so that only the console administrator can read it

    Explanation: NIST SP 800-204C says that with "as code" techniques, the code written for provisioning a resource is managed similarly to application source code, meaning it is versioned, documented, and has access controls defined like a source code repository. Option A is incorrect: Editing production directly bypasses the versioned, controlled workflow that treats infrastructure code like application code. Option B is incorrect: Email attachments provide no versioning or access control and are not a repository for infrastructure code. Option D is incorrect: Keeping it out of source control forfeits versioning and review, which NIST says should apply.