Skip to main content
Practice set 1 is free for every certification. Unlock sets 2-5 for $10.
Practice Exam

300-830 CLCCE — Cisco Certified Specialist - Collaboration Cloud Customer Experience

Test your knowledge with official exam-style questions

Questions25PassingPass/Fail (scaled score not published)Exam time90 min

Questions and options are shuffled each attempt

Email me this practice set

Get a link sent to your inbox so you can pick this back up anytime.

▶Cisco Certified Specialist - Collaboration Cloud Customer Experience — Practice Set 1: All Questions & Explanations

Full question text, answer options, and explanations for this practice set — a spoiler-free alternative is the interactive quiz above for scored, shuffled practice.

  1. 1. A retailer based in Ontario, Canada wants Cisco to supply its contact center PSTN numbers and bill for the PSTN service together with Webex Contact Center, without using any third-party carrier. Which Webex PSTN option matches this requirement, and what is its documented geographic limit?

    • A. Cloud Connected PSTN, because the connected provider is always Cisco in every region
    • B. Webex Contact Center PSTN, which is available in the contiguous United States and Canada only(correct)
    • C. Webex Calling Local Gateway, which is a Cisco-billed PSTN service
    • D. Cisco Calling Plan, which is available worldwide for all production contact centers

    Explanation: Webex Contact Center PSTN lets customers in the contiguous United States and Canada buy PSTN service through Cisco as a bundle with Webex Contact Center, and Cisco bills the customer directly. Option A is incorrect: With Cloud Connected PSTN the customer partners with a certified Cloud Connected PSTN provider, which handles activation, billing and number allocation; the provider is not always Cisco. Option C is incorrect: Local Gateway lets you keep your existing on-premises PSTN carrier through your own Session Border Controller; it is not a Cisco-billed PSTN service. Option D is incorrect: Cisco Calling Plan is supported in regions where Webex Calling supports service numbers and, for Webex Contact Center, for trials only; it is not a worldwide production option.

  2. 2. In Webex Contact Center, what is an entry point on an inbound voice channel?

    • A. A pool of agents that contacts wait in until an agent becomes available
    • B. A SIP trunk that connects the customer session border controller to Webex Calling
    • C. The association of an inbound telephone number to an IVR service flow(correct)
    • D. The destination an agent selects when signing in to receive calls

    Explanation: An entry point is the association of the inbound telephone number to an Interactive Voice Response (IVR) service flow; external numbers are mapped to IVR flows during provisioning of the inbound service. Option A is incorrect: That describes a queue, which is the holding area where contacts wait to be routed to agents. Option B is incorrect: A trunk is configured in Control Hub under Calling > Call Routing > Trunk for Local Gateway connectivity; it is not an entry point. Option D is incorrect: Agent destinations (Dial Number, Extension, Desktop) are chosen at sign-in and are unrelated to entry points.

  3. 3. A company wants to keep its existing on-premises PSTN carrier but deliver those calls to Webex Contact Center. Which statement correctly describes how Webex Calling Local Gateway provides this?

    • A. Webex Calling registers to the customer PBX, which then forwards PSTN calls to the contact center tenant
    • B. A certified Cloud Connected PSTN provider builds the connection and Local Gateway is not needed
    • C. Cisco hosts the SBC in the Webex cloud and the customer carrier delivers calls to it over the internet only
    • D. The customer Session Border Controller registers with Webex Calling and routes calls between Webex Calling and the on-premises PSTN or PBX(correct)

    Explanation: With Local Gateway, the customer SBC registers with Webex Calling and routes calls between Webex Calling and on-premises resources such as an enterprise PBX or the existing on-premises PSTN connectivity. Inbound calls arrive through the on-premises carrier and are forwarded via the SBC into Webex Calling to reach Webex Contact Center. Option A is incorrect: The direction of registration is reversed; the SBC registers to Webex Calling, not Webex Calling to a PBX. Option B is incorrect: Cloud Connected PSTN is the alternative model that replaces the on-premises carrier; Local Gateway is what retains it. Option C is incorrect: The Local Gateway is the customer's own SBC (for example Cisco CUBE or a supported third-party SBC); the configuration of the on-premises SBC is the customer's responsibility.

  4. 4. An agent works from home and has no desk phone. Which option under Select your Telephony Option at sign-in delivers voice calls to the browser using WebRTC?

    • A. Desktop(correct)
    • B. Extension
    • C. Dial Number with the International Dialing Format option selected
    • D. Dial Number with a +E.164 mobile number

    Explanation: Selecting Desktop lets the agent receive calls in the browser through WebRTC; it requires WebRTC to be enabled for the tenant and the Desktop option to be enabled in the agent's desktop profile. Option B is incorrect: Extension is a short internal number matched to a registered Webex Calling endpoint, so calls ring that endpoint instead of the browser. Option C is incorrect: Dial Number is a free-form numeric entry for a DID, mobile or PSTN number; the International Dialing Format option only changes how that number is addressed. Option D is incorrect: A +E.164 mobile number is still a Dial Number destination and sends the call out to the PSTN rather than to the browser.

  5. 5. A queue with team assignment has three call distribution groups (CDGs). A new contact is queued and none of the agents in the teams of the first CDG are available. What happens next?

    • A. The contact is immediately offered to every agent in all three CDGs regardless of the configured interval
    • B. The contact is parked for the configured duration, then the teams of the next CDG are added to the teams already eligible and the search continues(correct)
    • C. The contact is ended and the flow follows the Queue Contact error path
    • D. The queue switches to a circular routing pattern until an agent becomes available

    Explanation: In a team-assignment queue the system searches the first CDG first. If no matching agent is found, the contact is parked for the configured duration before target expansion adds the next CDG's teams to the existing ones. This repeats until a match is found or all groups are expanded. Option A is incorrect: Expansion happens over configured time intervals; the Check Agent Availability option or the Escalate Call Distribution Group activity is needed to expand sooner. Option C is incorrect: Having no available agents is not a failure; the contact simply parks in the queue. Queue Contact errors are for conditions such as an invalid queue or an agent already being assigned. Option D is incorrect: Queues with team assignment use the Longest Available pattern; they do not change routing pattern while a contact waits.

  6. 6. Agents in a queue with agent assignment are configured in the order A3, A4, A5, A6, A1, A2 using the Circular routing pattern. The first contact went to A3. A4 and A5 are both not logged in when the second contact arrives. Which agent receives the second contact, assuming A6 is available?

    • A. A3, because Circular always starts at the top of the list
    • B. A4, because the contact must wait for the next agent in sequence
    • C. A6, because routing continues from A4 and skips unavailable agents(correct)
    • D. A1, because the pointer moves to the longest available agent

    Explanation: Circular routing keeps a pointer positioned after the last agent chosen. After A3 received the first contact, the search for the second contact starts at A4, skips unavailable A4 and A5, and assigns the contact to the next available agent, A6. Option A is incorrect: Always starting from the top of the ordered list is the Top-Down pattern; Circular continues from where it left off. Option B is incorrect: Circular does not hold a contact for a specific agent; it moves on to the next available agent in the configured order. Option D is incorrect: Choosing the agent available the longest is the Longest Available pattern, not Circular.

  7. 7. A flow designer adds a Callback activity and leaves it on its default queue setting, so the callback stays in the queue where the call originated. What happens to the callback task?

    • A. It is created as a new interaction only after the agent returns the call
    • B. It moves to the bottom of the queue with no skills and the default priority
    • C. It is placed in the queue of the preferred agent after the call is disconnected automatically
    • D. It keeps its position, skills, priority and context and is assigned to the next available agent(correct)

    Explanation: When the callback stays in the original queue, the contact maintains its position, skills, priority and contextual data so it can be assigned to the next available agent. Option A is incorrect: The Callback activity creates a courtesy callback task in the queue at the time it runs; it does not wait for an agent to return the call. Option B is incorrect: That is what happens when a different queue is selected: the contact goes to the end of that queue with no skills and the default priority. Option C is incorrect: The call is not disconnected automatically; a Disconnect Contact activity is needed to end the branch, otherwise the call does not end when the callback request is placed.

  8. 8. A flow developer needs to see which activities ran, and whether each succeeded, for a call that already completed in production. Which statement about Flow Designer Debug is correct?

    • A. It is a post-call view that lists recent interactions for the flow and shows the executed activity path with Success or Failed outcomes(correct)
    • B. It lists only interactions that ended in an error and hides successful ones
    • C. It requires the call to have been transferred to an agent before logs are created
    • D. It steps through a live call in real time so activities can be changed while the caller waits

    Explanation: Flow debugging is a post-call process. The Interactions pane lists the most recent 100 interactions for the flow, searchable by Interaction ID, ANI, DNIS, date range or version label, and selecting one shows the sequence of activities with a Success or Failed outcome. Option B is incorrect: The table lists recent interactions for the flow regardless of outcome; failed activities are only highlighted within a selected interaction. Option C is incorrect: The documentation does not require a transfer to an agent; the Interactions pane lists recent interactions for the flow. Option D is incorrect: Debugging is a post-call review, not a live stepping tool.

  9. 9. An administrator created a desktop profile with Parent Type set to Site and now wants it available to all sites by changing the parent type to Tenant. What is true?

    • A. The parent type can be changed only while the profile is inactive
    • B. The parent type cannot be changed after the desktop profile is created(correct)
    • C. The parent type changes automatically when the profile is assigned to a second site
    • D. The parent type can be changed only by Cisco Support

    Explanation: When creating a desktop profile you choose Tenant (available to all sites) or Site (available to a specific site), and the documentation states you cannot change the parent type after the profile is created. A new profile must be created instead. Option A is incorrect: Inactive state is required to delete a profile, not to change its parent type, which cannot be changed at all. Option C is incorrect: There is no automatic conversion; the parent type is fixed at creation. Option D is incorrect: The documentation does not describe a Support-assisted change; the parent type is simply not editable after creation.

  10. 10. An administrator wants a custom desktop layout for one team. What does the administrator upload, and what should be used as the starting point?

    • A. An XML file written from scratch
    • B. A CSV file exported from Analyzer
    • C. A JSON layout file customized from the downloaded Default Desktop Layout.json(correct)
    • D. A ZIP archive created by Cisco Support

    Explanation: A custom desktop layout is defined in a JSON file. The administrator downloads the Default Desktop Layout.json file from the Desktop Layouts page, customizes it, and uploads it when creating the layout. Option A is incorrect: Layouts are defined in JSON, not XML. Option B is incorrect: Analyzer exports are for report data and are not layout definitions. Option D is incorrect: Administrators create layouts themselves from the downloadable default JSON; no Cisco-provided archive is involved.

  11. 11. No Recording Control activity is used in the flow. In what order does Contact Center evaluate recording settings for an inbound call?

    • A. Tenant level, then queue level, then recording schedule
    • B. Queue level first, and the tenant and schedule settings are ignored
    • C. Agent profile first, then the entry point
    • D. A matching active recording schedule first, then queue level, then tenant level(correct)

    Explanation: If a call matches an active recording schedule, the schedule settings decide whether it is recorded. If no schedule matches, Contact Center evaluates the queue-level recording settings, and then the tenant-level settings. Flow-level Recording Control, when present, overrides all of them. Option A is incorrect: The order is reversed; the most specific match (a schedule) is evaluated first. Option B is incorrect: Tenant-level and schedule-level settings are not ignored; they are part of the evaluation order. Option C is incorrect: The documentation describes schedule, queue and tenant levels for recording, not an agent profile or entry point order.

  12. 12. A site uses the Default_Multimedia_Profile, a team in that site is assigned a profile named TeamBlend, and one agent on the team is individually assigned a profile named AgentSolo. Which profile applies to that agent?

    • A. AgentSolo, because a profile on the individual agent has the highest precedence(correct)
    • B. TeamBlend, because team profiles override agent profiles
    • C. Default_Multimedia_Profile, because the site profile always applies
    • D. The profile with the highest channel capacity

    Explanation: A multimedia profile associated with an individual agent has the highest precedence. It overrides the profile of the agent's team, which in turn overrides the profile associated with the site. Option B is incorrect: The order is agent, then team, then site; team does not override agent. Option C is incorrect: The site profile is only the fallback when neither the team nor the agent has a different profile. Option D is incorrect: Precedence is determined by where the profile is assigned, not by comparing channel capacity.

  13. 13. A supervisor wants to change the columns of an Analyzer stock report. What is the correct approach?

    • A. Edit the stock report directly and save it
    • B. Create a copy of the stock report with Save As (Create a Copy) and edit the copy in your own folder(correct)
    • C. Ask Cisco to unlock the stock report for the tenant
    • D. Export the report to CSV and re-import it as a stock report

    Explanation: Stock reports are read-only. To edit one, create a copy by clicking Save As (or Create a Copy) and save it in your own folder, where it becomes a custom report you can edit. Option A is incorrect: Stock reports cannot be edited in place; Edit and Delete apply to custom reports. Option C is incorrect: No unlock request is needed because copying is a supported self-service action. Option D is incorrect: Exported CSV or Excel files are for viewing data outside Analyzer and cannot be imported as stock reports.

  14. 14. A supervisor wants a real-time Analyzer visualization that shows all activity since midnight. Which Compute duration should be selected?

    • A. 30 minutes
    • B. None
    • C. Start of Day(correct)
    • D. 15 minutes

    Explanation: For a real-time visualization the Duration options are None (a view of current activity), 5, 15 or 30 minutes (activity from up to that long ago to the present), and Start of Day (all activity since midnight). Option A is incorrect: 30 minutes is the longest rolling window; it covers up to 30 minutes ago, not the whole day. Option B is incorrect: None provides a view of the current activity only. Option D is incorrect: 15 minutes covers only the last 15 minutes of activity.

  15. 15. A network team is sizing bandwidth for agents who will receive calls through WebRTC Desktop. According to the Webex Contact Center documentation, what is the minimum bandwidth per call, and which tool is advised to test the network?

    • A. 100 kbps per call; a VDI session test
    • B. 1 Mbps per call; the Webex CScan tool
    • C. 500 kbps per call; a packet capture of agent PCs
    • D. 100 kbps per call; the Webex CScan tool(correct)

    Explanation: WebRTC requires a minimum of 100 kbps per call, and administrators are advised to run the Webex CScan (Advanced CSCAN) tool from the networks where WebRTC will be deployed to test the network, agent computer, microphone and latency. Option A is incorrect: Virtual Desktop Infrastructure does not support WebRTC, so a VDI session test is not the recommended method. Option B is incorrect: The documented minimum is 100 kbps per call, not 1 Mbps. Option C is incorrect: The documented minimum is 100 kbps per call and the advised test tool is CScan, not a packet capture.

  16. 16. An administrator has created a WhatsApp asset in Webex Connect and registered it with Webex Contact Center. Which entry point settings route that channel?

    • A. Channel Type Social Channel, Social Channel Type WhatsApp, and the registered asset selected in Asset Name(correct)
    • B. Channel Type Inbound Telephony with a support number mapped to the asset
    • C. Channel Type Chat with a Routing Flow chosen from Flow Designer
    • D. Channel Type Outbound Telephony with the asset as the outdial queue

    Explanation: To set up a digital channel such as WhatsApp, create an entry point with Channel Type Social Channel, choose the Social Channel Type (Facebook Messenger, SMS, WhatsApp or Apple Business Chat), and map the channel asset in the Asset Name drop-down list. A queue with channel type Social Channel is also created. Option B is incorrect: Inbound Telephony entry points map PSTN numbers to IVR flows and are for voice, not digital assets. Option C is incorrect: WhatsApp is a Social Channel type, and the Routing Flow field is not applicable to Email, Chat and Social Channel types. Option D is incorrect: Outbound Telephony entry points are used for outdial calls to customers, not for inbound digital conversations.

  17. 17. Before digital channels are set up for a tenant, which Webex Connect nodes must be set to the Authorized state?

    • A. The HTTP Request and Parse nodes
    • B. The Webex CC Task and Webex CC Engage nodes(correct)
    • C. The Voicemail and Callback nodes
    • D. The Webex Calling and Webex Meetings nodes

    Explanation: Node authorization is required so that Webex Connect nodes can communicate with other applications such as Webex Contact Center and Webex Engage; the Webex CC Task and Webex CC Engage nodes must be Authorized before setting up digital channels. Option A is incorrect: These are Flow Designer activities, not the Webex Connect nodes that require authorization for digital channels. Option C is incorrect: These are voice flow activities and are unrelated to Webex Connect node authorization. Option D is incorrect: The documentation names the Webex CC Task and Webex CC Engage nodes, not Calling or Meetings nodes.

  18. 18. A contact center defines a skill for each language its agents speak and wants to record each agent's level of fluency. Which skill type and value range does Webex Contact Center document for this need?

    • A. A text skill with a value from 0 to 100
    • B. A boolean skill with a value from 1 to 5
    • C. A proficiency skill with a value from 0 to 10(correct)
    • D. An enum skill with a value from 1 to 10

    Explanation: A proficiency skill can have a value ranging from 0 to 10 representing an agent's level of expertise, for example one skill per language spoken. Option A is incorrect: A text skill is free-form text that must match exactly. Option B is incorrect: A boolean skill holds true or false, not a numeric range. Option D is incorrect: An enum skill is a named set of predefined values, such as Sales, Service and Billing.

  19. 19. What is the default Redirection on No Answer (RONA) timeout for the Email channel in Control Hub?

    • A. 18 seconds
    • B. 30 seconds
    • C. 120 seconds
    • D. 300 seconds(correct)

    Explanation: The RONA defaults are 18 seconds for Telephony, 30 seconds for Chat, 300 seconds for Email and 30 seconds for Social. If an agent does not answer within the timeout, the contact returns to the queue and the agent state changes to RONA. Option A is incorrect: 18 seconds is the default for Telephony. Option B is incorrect: 30 seconds is the default for Chat and Social, not Email. Option C is incorrect: 120 seconds is the maximum allowed value for Telephony, not an Email default.

  20. 20. A flow developer will use the HTTP Request activity to call a partner REST API. When is a custom connector required?

    • A. Only when the endpoint must be authenticated; otherwise turn off Use Authenticated Endpoint(correct)
    • B. Always, because every HTTP Request needs a connector
    • C. Only when the response is XML
    • D. Only when the request method is POST

    Explanation: A custom connector is required only if you need to authenticate the endpoint. For an unauthenticated endpoint you can disable the Use Authenticated Endpoint toggle in the HTTP Request activity and supply the full request URL instead. Option B is incorrect: Connectors are needed only for authenticated endpoints. Option C is incorrect: The response format (JSON, TOML, XML or YAML) is handled by Parse Settings and does not determine connector use. Option D is incorrect: The method (GET, POST, PUT, PATCH, DELETE, OPTIONS, HEAD) does not decide whether a connector is required.

  21. 21. A developer receives webhooks from Webex Contact Center and wants to confirm they are authentic and unmodified. How is this verified?

    • A. Allow-list the static IP addresses Cisco publishes for webhook delivery
    • B. Compute an HMAC-SHA256 of the unmodified request body with the subscription secret and compare the hex output with the X-WebexCC-Signature header(correct)
    • C. Hash the request body with MD5 and compare it to the Content-Length header
    • D. Check the Basic Authentication header against the subscription name

    Explanation: When a subscription is registered with a secret, webhooks include an X-WebexCC-Signature header. The receiver supplies the unmodified request body and the secret to HMAC-SHA256 and compares the hex-encoded output with the header value. Option A is incorrect: The developer documentation states that static IP addresses cannot be provided because the cloud infrastructure is dynamic. Option C is incorrect: The documented algorithm is HMAC-SHA256 with the subscription secret, and the comparison is with the signature header. Option D is incorrect: Verification is by cryptographic signature, not Basic Authentication.

  22. 22. Which Webex Contact Center API style lets clients write queries that request only the fields they need, narrowing the response, for example when retrieving task data?

    • A. Webhooks, which push events to a destination URL
    • B. SOAP
    • C. GraphQL, through the Search API(correct)
    • D. A REST endpoint that always returns full resources

    Explanation: Webex Customer Experience offers GraphQL APIs so that clients can extract only the data relevant to their use case and narrow the output; the GraphQL Search API supports queries such as taskDetails. Option A is incorrect: Webhooks deliver near-real-time event notifications; they are not a query mechanism. Option B is incorrect: SOAP is not an API style described for the Webex Contact Center platform, which uses REST, GraphQL and webhooks. Option D is incorrect: REST resources are addressed by base URLs such as /agents; GraphQL is the style specifically offered for narrowing output.

  23. 23. A contact center wants callers to hear an IVR survey after the agent ends the call. Where should the Feedback V2 activity be placed?

    • A. In the main flow immediately after the Welcome menu
    • B. In the PreDial event flow before the call is offered to an agent
    • C. In a separate flow attached only to the outdial entry point
    • D. In the Event Flows canvas after the AgentDisconnected event, followed by a Disconnect Contact activity(correct)

    Explanation: IVR post-call surveys powered by Webex Experience Management are configured with the Feedback V2 activity in the Event Flows canvas after the AgentDisconnected event. The Disconnect Contact activity must follow to end the IVR call. Option A is incorrect: A survey placed at the start would run before the customer talks to an agent, not after the call. Option B is incorrect: PreDial event flows run before dialing; Set Caller ID is the activity documented for that event flow, not Feedback V2. Option C is incorrect: The documented placement is the AgentDisconnected event in the Event Flows canvas, not a separate flow attached to an outdial entry point.

  24. 24. Which TWO of the following are AI-generated summaries provided by the Cisco AI Assistant for Webex Contact Center?

    • A. Dropped call summary(correct)
    • B. Weekly supervisor KPI summary
    • C. Post-call (wrap-up) summary(correct)
    • D. Quarterly license consumption summary
    • E. Pre-call customer profile summary

    Explanation: The AI Assistant provides AI-generated summaries for dropped calls, calls transferred from an AI agent, mid-call consults or transfers, and post-call (wrap-up) summaries. Dropped call and post-call summaries are two of these. Option B is incorrect: Weekly KPI summaries are not an AI Assistant summary type; KPIs are viewed in Analyzer and Supervisor Desktop. Option D is incorrect: License consumption is covered by a separate license consumption and reporting guide, not an AI-generated summary. Option E is incorrect: The documented summaries cover dropped, AI-agent-transfer, mid-call and post-call interactions, not pre-call profiles.

  25. 25. A company wants a Webex AI agent that works independently toward defined goals, decides what to do from available information and uses a knowledge base to answer questions. Which AI agent type matches?

    • A. Autonomous AI agent(correct)
    • B. Scripted AI agent
    • C. Capacity-based AI agent
    • D. Preferred-agent AI agent

    Explanation: Autonomous AI agents work independently to fulfill defined goals, make decisions from available information and predefined actions, and use a knowledge base to answer questions. Option B is incorrect: Scripted AI agents follow predefined rules and instructions and respond from a user-created training corpus. Option C is incorrect: Capacity-based is a team type for routing voice calls to a capacity-based directory number, not an AI agent type. Option D is incorrect: Preferred-agent routing is the Queue To Agent routing capability, not an AI agent type.