Skip to main content
Practice set 1 is free for every certification. Unlock sets 2-5 for $10.
Practice Exam

500-430 — Cisco AppDynamics Professional Implementer

Test your knowledge with official exam-style questions

Questions25PassingNot publishedExam time90 min

Questions and options are shuffled each attempt

Email me this practice set

Get a link sent to your inbox so you can pick this back up anytime.

▶Cisco AppDynamics Professional Implementer — Practice Set 1: All Questions & Explanations

Full question text, answer options, and explanations for this practice set — a spoiler-free alternative is the interactive quiz above for scored, shuffled practice.

  1. 1. A company is installing an on-premises Controller as a single-tenant Controller. Six months later, two business units ask to be partitioned into separate accounts with their own users. Which statement about changing the tenancy mode is accurate?

    • A. Switching from single-tenant to multi-tenant mode is supported, but switching back from multi-tenant to single-tenant is not(correct)
    • B. Neither direction is supported after installation
    • C. Switching from multi-tenant to single-tenant mode is supported, but switching to multi-tenant is not
    • D. Both directions are supported at any time from the Enterprise Console

    Explanation: The documentation states you choose the tenancy mode at installation time and that you can later switch from single-tenant to multi-tenant mode, but it is not possible to switch from multi-tenant to single-tenant mode. Why the others are wrong: B: A later switch to multi-tenant mode is explicitly supported. C: This reverses the documented rule; multi-tenant to single-tenant is the unsupported direction. D: Only one direction is supported, so the change is not freely reversible.

  2. 2. Which statement about the Events Service instance embedded in the Controller is documented?

    • A. It is intended for production Application Analytics and EUM because it replicates data across nodes
    • B. It is not meant to be used with production Application Analytics or EUM installations because it runs on the Controller machine and offers no data replication or scalability(correct)
    • C. It can be upgraded in place and its data migrated to an external Events Service later
    • D. It is the only Events Service topology that supports a shared Events Service for multiple Controllers

    Explanation: The Events Service topology page says the embedded instance is not meant for production Application Analytics or EUM installations, since it runs on the same machine as the Controller and does not offer data replication or scalability. Why the others are wrong: A: The embedded instance offers no replication, which is exactly why it is not meant for production Analytics or EUM. C: The documentation notes that it is not possible to migrate data from the embedded Events Service to an external Events Service instance if upgrading later. D: A shared Events Service is described as an Events Service deployed to support multiple Controllers, not as a property of the embedded instance.

  3. 3. An implementer must install an EUM Server for a production environment. Which deployment mode matches the documentation?

    • A. Demo mode, where the EUM Server shares the Controller's MySQL instance
    • B. Demo mode, because it listens on ports 7001 and 7002
    • C. Either mode, because both install the EUM Server on the Controller host
    • D. Production mode, where the EUM Server and Controller sit on different hosts and the EUM Server hosts its own MySQL instance(correct)

    Explanation: For production installation, choose the Production (Product) option, where the EUM Server and Controller sit on different hosts and the EUM Server hosts its own MySQL instance. Why the others are wrong: A: Demo mode is for demonstration and light testing and shares the Controller's MySQL instance. B: Demo mode listens on ports 7001 or 7002, but that does not make it suitable for production. C: Only demo mode installs the EUM Server on the Controller host.

  4. 4. When estimating Controller sizing, which factor does the documentation call the best indicator of the actual workload on the Controller?

    • A. The number of monitored business applications
    • B. The number of Controller UI users
    • C. The metric ingestion rate(correct)
    • D. The number of nodes, such as JVMs, estimated before installation

    Explanation: Nodes are suggested for estimating deployment size before installation, but the best indicator of the actual Controller workload is the metric ingestion rate. After installation you verify sizing using the metric upload rate. Why the others are wrong: A: The number of business applications is not named as the workload indicator. B: The number of UI users is not named as the workload indicator. D: Node count is the pre-installation estimate, but the documentation says the metric ingestion rate is the best indicator of actual workload.

  5. 5. What is the documented minimum number of nodes for a multi-node Events Service cluster?

    • A. Three(correct)
    • B. Two
    • C. Five
    • D. Seven

    Explanation: A multi-node cluster is made up of three or more nodes, and the requirements page states that three nodes minimum are required to configure the Events Service. Why the others are wrong: B: Two nodes is below the documented minimum. C: Five nodes appears in sizing examples but is not the minimum. D: Seven nodes is the largest size shown in the sizing table, not the minimum.

  6. 6. A proxy sits between two monitored tiers. Which action does the documentation say is important so that Splunk AppDynamics can correlate traffic across tiers?

    • A. Strip all custom headers to keep requests small
    • B. Rewrite the Host header to the Controller hostname
    • C. Replace the Authorization header with an agent account access key
    • D. Ensure the proxy preserves the singularityheader custom header(correct)

    Explanation: Splunk AppDynamics adds a custom header named singularityheader to correlate traffic across tiers. Any load balancer, proxy or firewall between monitored tiers or between the tiers and the Controller must preserve it. Why the others are wrong: A: Stripping custom headers would remove singularityheader and break cross-tier correlation. B: Nothing in the network requirements asks you to rewrite the Host header for correlation. C: The Authorization header is not involved in correlation.

  7. 7. The documentation lists an order in which to upgrade platform services. Which order is correct?

    • A. Controller, Events Service, EUM Server, Enterprise Console
    • B. Enterprise Console, Events Service, EUM Server, Controller(correct)
    • C. Enterprise Console, Controller, Events Service, EUM Server
    • D. Events Service, Enterprise Console, Controller, EUM Server

    Explanation: The upgrade order is: upgrade the Enterprise Console, then the Events Service, then the EUM Server, and finally the Controller. Why the others are wrong: A: This places the Controller first and the Enterprise Console last, the reverse of the documented order. C: The Controller is the last service to upgrade, not the second. D: The Enterprise Console is upgraded first, before any other service.

  8. 8. The Controller ships with HTTPS on port 8181 secured by a self-signed certificate. For which monitored technology does the documentation say you must replace it with a CA-signed certificate?

    • A. .NET Agents(correct)
    • B. Java Agents
    • C. Machine Agents
    • D. Database Agents

    Explanation: The documentation states that if you are deploying .NET Agents, you must replace the self-signed certificate with one signed by a CA, since the .NET agents do not work with self-signed certificates. Why the others are wrong: B: No such restriction is stated for Java Agents on that page. C: No such restriction is stated for Machine Agents on that page. D: No such restriction is stated for Database Agents on that page.

  9. 9. You are configuring a load balancer in front of a primary and secondary Controller HA pair. Which configuration matches the documentation?

    • A. Round-robin routing so both Controller application servers share the load
    • B. Both application servers active, with only the database in standby
    • C. Traffic sent to only one Controller at a time; both databases run but both application servers are never active together(correct)
    • D. Only the secondary Controller serves traffic until the primary database is dropped

    Explanation: In an HA pair the databases for both Controllers should be running, but both application servers should never be active at the same time. The load balancer policy should send traffic to one Controller at a time, not round-robin. Why the others are wrong: A: The documentation says not to use round-robin or similar distribution for the Controller pair. B: The application servers must not both be active; the databases are the ones that run on both. D: Nothing in the HA description requires dropping the primary database.

  10. 10. The Enterprise Console accesses Events Service hosts over SSH. Which key requirement is documented?

    • A. A password-protected RSA key in OpenSSH format
    • B. A PEM-format RSA key that does not use password protection(correct)
    • C. An Ed25519 key in the default OpenSSH format
    • D. A DSA key stored on the Controller host

    Explanation: You create PEM public and private keys in RSA format and the key file must not use password protection. The Enterprise Console documentation also notes it expects the older PEM format rather than the newer OpenSSH format. Why the others are wrong: A: The key must not be password protected, and the format must be PEM. C: The Enterprise Console expects keys in the older PEM format, not OpenSSH Ed25519 format. D: DSA is not mentioned; the documented command generates an RSA key.

  11. 11. Which statement describes the Enterprise Console Express Install option?

    • A. It lets you select any target version and build an HA pair
    • B. It installs a three-node Events Service cluster only
    • C. It installs a single-node Controller and embedded Events Service on one host and automatically installs the latest version(correct)
    • D. It is available only when the Controller is installed on Windows

    Explanation: Express Install provides a quick way to install a fresh single node Controller and embedded Events Service. It does not give you the option to choose the version; it installs the latest version of each service. Custom Install gives more control. Why the others are wrong: A: That describes Custom Install, which lets you pick a target version and enter a secondary host for HA. B: Express Install installs the Controller and Events Service on a shared host rather than a cluster. D: Nothing restricts Express Install to Windows; it installs the Controller and Events Service on a shared host.

  12. 12. An administrator plans to upgrade a Controller with the Enterprise Console and asks whether application agents must be stopped first. What does the documentation say?

    • A. All agents must be stopped before the upgrade starts
    • B. The upgrade requires no downtime because the HA pair always fails over
    • C. Only Java Agents must be stopped
    • D. The upgrade causes Controller downtime, but it is not necessary to stop agents(correct)

    Explanation: The documentation states that an upgrade results in Controller downtime, but it is not necessary to stop agents during the Controller upgrade. Why the others are wrong: A: Stopping agents is explicitly described as unnecessary. B: The upgrade does result in Controller downtime. C: No agent type has to be stopped for the Controller upgrade.

  13. 13. After unzipping AppServerAgent.zip on the host that runs a Java application, what is the next documented step?

    • A. Add the Java Agent binary to the application process, typically by passing the agent JAR file as a startup argument(correct)
    • B. Run Installer.bat from an elevated prompt
    • C. Restart IIS
    • D. Install the Agent Coordinator service

    Explanation: After unzipping the agent you add the Java Agent binary to the application process, typically by passing the agent JAR as a startup argument, then restart the application and view data in the Controller UI. Why the others are wrong: B: Installer.bat is part of the .NET Agent installation for IIS. C: Restarting IIS belongs to the .NET Agent procedure. D: The Agent Coordinator service is started by the .NET Agent installer.

  14. 14. When you run Installer.bat from the extracted .NET Agent archive in an elevated prompt, which service does the batch file start?

    • A. Controller application server
    • B. Events Service API store
    • C. Agent Coordinator service(correct)
    • D. Analytics Agent

    Explanation: The procedure says to execute Installer.bat, which installs the agent and starts the Agent Coordinator service, after which you restart IIS. Why the others are wrong: A: The Controller application server is a Controller component, not something the .NET Agent installer starts. B: The Events Service API store is part of the Events Service, not the .NET Agent installer. D: The Analytics Agent is a separate component and is not mentioned in this procedure.

  15. 15. What is the documented maximum length of an application or tier name?

    • A. 50 characters
    • B. 225 characters
    • C. 500 characters
    • D. 100 characters(correct)

    Explanation: The maximum length of an application or tier name is 100 characters. Node names allow 225 characters on Linux and 500 on all other operating systems. Why the others are wrong: A: 50 is not a documented limit. B: 225 characters is the node name limit on Linux, not the application or tier name limit. C: 500 characters is the node name limit on non-Linux operating systems.

  16. 16. You are installing a standalone Machine Agent from the non-JRE zip file on a server with no app agent. Which settings are documented as required in controller-info.xml?

    • A. Only the application and tier names
    • B. The Controller host name, port number, and account access key(correct)
    • C. Only the Events Service host
    • D. The EUM App Key and collector URL

    Explanation: The required configuration is the Controller host name, port number, and account access key. Agent account information is additionally required for multi-tenant mode or SaaS installations. Why the others are wrong: A: Application and tier names are optional, and are not specified when an app agent is on the same server. C: The Events Service host is not among the required Machine Agent settings listed. D: The EUM App Key and collector URL apply to mobile instrumentation, not the Machine Agent.

  17. 17. For an on-premises Database Visibility deployment, what must you do before starting the Database Agent?

    • A. Start the Events Service(correct)
    • B. Install the Machine Agent on the database host
    • C. Enable multi-tenant mode on the Controller
    • D. Upgrade the Controller to the latest version

    Explanation: The documentation states that if you use an on-premises version of Database Visibility you must start the Events Service before you start the Database Agent. The system requirements page repeats that the Database Agent requires the Events Service. Why the others are wrong: B: A Machine Agent on the database host is not listed as a prerequisite. C: Tenancy mode is unrelated to starting the Database Agent. D: An upgrade is not required before starting the agent.

  18. 18. A team wants Browser RUM for a web application that has no server-side Splunk AppDynamics app agents. Which injection approach does the documentation point to first?

    • A. Automatic injection
    • B. Assisted injection using injection rules
    • C. Assisted injection using attribute injection
    • D. Manual injection(correct)

    Explanation: The guidelines say that if you want Browser RUM and do not have any app agents on the server side, use manual injection. Manual injection is supported on all platforms and frameworks. Why the others are wrong: A: Automatic injection requires a Java or .NET app agent on the server side to inject at runtime. B: Assisted injection involves the server-side Java or .NET app agent doing part of the work. C: Attribute injection also relies on the app agent replacing the JS_HEADER and JS_FOOTER variables.

  19. 19. Which installation methods does the documentation list for the iOS SDK, and which are recommended?

    • A. Manual only; the others are unsupported
    • B. CocoaPods, Swift Package Manager, or manual; CocoaPods or Swift Package Manager are recommended(correct)
    • C. Swift Package Manager only
    • D. CocoaPods or manual; Swift Package Manager is unsupported

    Explanation: You can install the iOS SDK using CocoaPods, Swift Package Manager or by manually downloading it. CocoaPods or Swift Package Manager are recommended because they handle dependencies and build settings and simplify upgrading. Why the others are wrong: A: Three methods are documented and manual is not the recommended one. C: CocoaPods and manual install are also documented. D: Swift Package Manager is supported for iOS Agent 23.10.1 or higher.

  20. 20. Which credentials are used to log in to the Splunk AppDynamics Administration Console (admin.jsp)?

    • A. The account owner password
    • B. The account administrator password
    • C. Any user with the Administer users, groups, roles permission
    • D. The root user password(correct)

    Explanation: You log into the system account with the root user password. The root user password is different from a normal account password and is not the same as the account owner or account administrator password. Why the others are wrong: A: The documentation says the root password is not the same as the account owner password. B: It also says the root password is not the same as the account administrator password. C: Console access is tied to the root user, not to a permission granted to a regular account user.

  21. 21. What is the default output format of the Controller REST APIs, and how do you request JSON?

    • A. XML by default; set the output query parameter to JSON(correct)
    • B. JSON by default; add output=XML for XML
    • C. XML by default; set the Accept header to text/plain
    • D. JSON by default; JSON cannot be turned off

    Explanation: The Controller APIs return XML or JSON and the default output format is XML. To retrieve JSON, set the output query parameter to JSON. Why the others are wrong: B: The default is XML, not JSON. C: The documented mechanism is the output query parameter, not a text/plain Accept header. D: The default is XML, so JSON must be requested.

  22. 22. Which Controller API call retrieves all business applications?

    • A. GET /controller/rest/applications/all
    • B. GET /controller/rest/business-apps
    • C. GET /controller/rest/applications(correct)
    • D. POST /controller/rest/applications/list

    Explanation: The Application Model API method for retrieving all business applications is GET /controller/rest/applications, which returns names and internal numeric identifiers. Why the others are wrong: A: There is no documented /all suffix. B: The documented resource is applications, not business-apps. D: This is a read operation, so it is a GET and has no /list suffix.

  23. 23. Which eventtype value do you pass when you create a custom event through the Events API?

    • A. APPLICATION_DEPLOYMENT
    • B. APPLICATION_ERROR
    • C. DIAGNOSTIC_SESSION
    • D. CUSTOM(correct)

    Explanation: For the Create a Custom Event method the eventtype parameter is CUSTOM, and an optional customeventtype names the source, for example nagios. The caller needs the Create Events permission. Why the others are wrong: A: APPLICATION_DEPLOYMENT is the eventtype used to create application deployment events. B: APPLICATION_ERROR appears as an event type in the event retrieval example, not as the value for creating a custom event. C: DIAGNOSTIC_SESSION is likewise an event type seen when retrieving events.

  24. 24. Which URI returns all health rule violations that occurred in an application within a specified time frame?

    • A. /controller/rest/applications/application_id/health-rules/violations
    • B. /controller/rest/applications/application_id/problems/healthrule-violations(correct)
    • C. /controller/rest/applications/application_id/events/violations
    • D. /controller/rest/alerts/healthrule-violations

    Explanation: The Retrieve All Health Rule Violations method uses /controller/rest/applications/application_id/problems/healthrule-violations, with a time-range-type parameter. Why the others are wrong: A: There is no health-rules/violations path in the documented method. C: Violations are not retrieved from an events/violations path. D: The method is scoped to an application, not a top-level alerts resource.

  25. 25. To integrate health rule violations with a third-party ticketing system through a custom action, which two items make up the custom action?

    • A. A WAR file and a persistence.xml file
    • B. A JSON policy template and a REST endpoint
    • C. A custom action script and a custom.xml file(correct)
    • D. A Java Agent plugin and an agent.properties file

    Explanation: A custom action is made up of a custom action script and a custom.xml file, which must exist before you create the action. It is commonly used to integrate third-party alerting and ticketing systems. Why the others are wrong: A: A WAR file and persistence.xml are not part of a custom action. B: A custom action is script-based; a JSON template is not what is documented. D: Agent plugins and agent.properties are unrelated to custom actions.