500-425 — Cisco AppDynamics Associate Administrator
Test your knowledge with official exam-style questions
Questions and options are shuffled each attempt
Email me this practice set
Get a link sent to your inbox so you can pick this back up anytime.
▶Cisco AppDynamics Associate Administrator — Practice Set 1: All Questions & Explanations
Full question text, answer options, and explanations for this practice set — a spoiler-free alternative is the interactive quiz above for scored, shuffled practice.
1. What is the default log level for Splunk AppDynamics agent logs?
- A. ALL
- B. WARN
- C. INFO(correct)
- D. DEBUG
Explanation: The documentation lists INFO as the "Default log level", reporting informational messages that highlight progress at a coarse-grained level. Why the other options are wrong: A) ALL is the most verbose level (it logs all events) and is not the default. B) WARN reports potentially harmful situations only and is less verbose than the default. D) DEBUG reports fine-grained events useful for debugging and is more verbose than the default.
2. An operator wants to request agent debug logs and thread dump samples for a node from the Controller UI. Which permission do users need to request agent thread dumps or agent debug logs?
- A. Configure Information Points
- B. Agent Advanced Operation(correct)
- C. Configure Health Rules
- D. Can Create Custom Dashboards
Explanation: The documentation states that to request agent thread dumps or agent debug logs, users need the Agent Advanced Operation permission. Why the other options are wrong: A) Configure Information Points governs information points, not agent log requests. C) Configure Health Rules governs creating, editing and deleting health rules, not agent log requests. D) Can Create Custom Dashboards governs creating or editing custom dashboards, not agent log requests.
3. What is the default maximum number of registered metrics for an application (app) agent?
- A. 1450
- B. 30000
- C. 100000
- D. 5000(correct)
Explanation: The Metrics Limits page states that for an app agent the default maximum number of registered metrics is 5000. Why the other options are wrong: A) 1450 is the default maximum for the Machine Agent, not for an app agent. B) 30000 is the documented limit on total Machine Agents and containers reporting to one Controller, not a per-agent metric limit. C) 100000 is the documented limit on App Agents reporting to a single Controller, not a per-agent metric limit.
4. A team is planning to roll out agents with the Agent Installer. What does the current documentation warn about the Agent Installer?
- A. It requires no microservices configuration
- B. It is the only way to upgrade agents
- C. It is in maintenance mode and Agent Management should be used(correct)
- D. It can only install the Database Agent
Explanation: The Agent Installer page carries the warning "Agent Installer is in maintenance mode. Use Agent Management." Why the other options are wrong: A) The page notes that the Agent Installer requires microservices configuration performed by Splunk AppDynamics, so this is the opposite of the documentation. B) The page directs readers to Agent Management rather than describing the Agent Installer as the only upgrade path. D) The page does not limit the Agent Installer to the Database Agent.
5. A default health rule with a Warning violation is currently violated for an application entity. How does the UI mark the affected entity?
- A. Yellow-orange(correct)
- B. Red
- C. Grey
- D. Green
Explanation: Affected entities are marked yellow-orange for a Warning violation and red for a Critical violation. Why the other options are wrong: B) Red is used for a Critical violation, not a Warning violation. C) Grey is not the documented marking for a Warning violation. D) Green is not described as a violation color for default health rules.
6. An administrator opens Troubleshoot > Violations & Anomalies and wants to see only the health rule violations that are currently in the Open status. Which selection in the drop-down list does this?
- A. Anomalies Open Now
- B. Health Rule Violations Archived
- C. Health Rule Violations within Time Range
- D. Health Rule Violations Open Now(correct)
Explanation: To view the violations that are currently in the Open status, select Health Rule Violations Open Now from the drop-down list. Why the other options are wrong: A) The documentation does not describe an "Anomalies Open Now" option for this purpose. B) The documentation does not describe an archived violations option in this list. C) Health Rule Violations within Time Range shows all violations for the selected time period, not only those open now.
7. By default, after how long does the Controller purge transaction snapshots, unless the retention period is changed or the snapshot is archived?
- A. 24 hours
- B. Two weeks(correct)
- C. Seven days
- D. Ninety days
Explanation: The documentation states that the Controller purges transaction snapshots after two weeks by default, and that the retention period can be configured or a snapshot archived to preserve it. Why the other options are wrong: A) 24 hours is not the documented default. C) Seven days is not the documented default. D) Ninety days is not the documented snapshot retention default (90 days appears only in the weekly baseline description).
8. A user needs to create a scheduled report that emails an Application Health report weekly. Which kind of permission does the documentation say is needed to create scheduled reports?
- A. The account-level Configure Scheduled Reports permission(correct)
- B. The Can Create Collectors permission
- C. The Agent Advanced Operation permission
- D. The application-level Configure Health Rules permission
Explanation: The page states you need the account-level Configure Scheduled Reports permission to create scheduled reports, and account-level permissions to view and configure them. Why the other options are wrong: B) Can Create Collectors is a Database Visibility collector permission. C) Agent Advanced Operation is for agent logs and thread dumps. D) Configure Health Rules is for health rules, not reports.
9. Which two types of data collectors does Splunk AppDynamics provide?
- A. Backend data collectors and tier data collectors
- B. Snapshot data collectors and health data collectors
- C. SQL data collectors and JMX data collectors
- D. Method invocation data collectors and HTTP data collectors(correct)
Explanation: The documentation states there are two types: method invocation data collectors (code data such as arguments, variables and return values) and HTTP data collectors (URLs, parameter values, headers and cookies). Why the other options are wrong: A) Backend and tier data collectors are not documented types of data collectors. B) Snapshot and health data collectors are not documented types of data collectors. C) SQL and JMX data collectors are not documented types of data collectors.
10. Which permission is needed to configure data collectors?
- A. Can Edit All Collectors
- B. Configure Diagnostic Data Collectors(correct)
- C. Configure Information Points
- D. Configure Scheduled Reports
Explanation: The Configure a Data Collector page states that to configure data collectors you need the Configure Diagnostic Data Collectors permission. Why the other options are wrong: A) Can Edit All Collectors applies to Database Visibility collectors, not to data collectors on business transactions. C) Configure Information Points is for creating, editing or deleting information points. D) Configure Scheduled Reports is an account-level permission for scheduled reports.
11. A team configured a method invocation data collector on a business transaction. In which section of a transaction snapshot does the collected method data appear?
- A. COOKIES
- B. Error Details
- C. Business Data(correct)
- D. HTTP DATA
Explanation: Information captured by HTTP data collectors appears in the HTTP DATA and COOKIES sections, while method invocation data appears in the Business Data section. Why the other options are wrong: A) COOKIES holds data captured by HTTP data collectors. B) Error Details is not where method invocation data collector output is shown. D) HTTP DATA holds data captured by HTTP data collectors.
12. A database administrator is naming a new Database Collector in the Create New Collector dialog. Which character does the documentation say not to use in the Database Collector name?
- A. Colon (:)(correct)
- B. Underscore (_)
- C. Hyphen (-)
- D. Period (.)
Explanation: The Add a Database Collector page says: "Do not use a colon (:) in the Database Collector name." Why the other options are wrong: B) An underscore is not called out as prohibited. C) A hyphen is not called out as prohibited. D) A period is not called out as prohibited.
13. An administrator created a Database Collector last month and now wants to read back the stored database password from the collector configuration to reuse it elsewhere. What does the documentation say about the saved password?
- A. It can be retrieved by any user with the Can Edit All Collectors permission
- B. It is encrypted when saved and cannot be retrieved afterwards(correct)
- C. It is automatically emailed to the collector creator
- D. It is stored in plain text so it can be viewed in the Collectors panel
Explanation: The note on the page states that when you create a Database Collector the password is encrypted and saved, and that once saved you cannot retrieve the saved password. Why the other options are wrong: A) The page says the saved password cannot be retrieved, regardless of permission. C) Nothing in the documentation describes emailing the password. D) The page says the password is encrypted, not stored in plain text.
14. Which of the following is NOT one of the health statuses described for entities affected by a health rule?
- A. Warning
- B. Critical
- C. Normal
- D. Degraded(correct)
Explanation: The documentation states that health statuses are represented as critical, warning, normal and unknown. "Degraded" is not one of them. Why the other options are wrong: A) Warning is a documented health status. B) Critical is a documented health status. C) Normal is a documented health status.
15. A health rule violation remains open and an administrator finds the Continues Critical events too frequent. What is the default value of the Wait Time after Violation setting that throttles these events?
- A. Every 10 minutes
- B. Every 120 minutes
- C. Every 1 minute
- D. Every 30 minutes(correct)
Explanation: The page states that Wait Time after Violation throttles how often Continues events are generated for continuing violations, and that the default is every 30 minutes. Why the other options are wrong: A) 10 minutes is the default periodic snapshot interval, not the Wait Time after Violation default. B) 120 minutes is the maximum evaluation time frame, not the Wait Time after Violation default. C) The controller evaluates an open violation every minute, but the Continues event throttle default is not every minute.
16. A health rule defines both a critical condition and a warning condition. When is the warning condition evaluated?
- A. Only on weekends
- B. Only when the critical condition is true
- C. Always, before the critical condition
- D. Only if the critical condition is not true(correct)
Explanation: Critical conditions are evaluated before warning conditions; the warning condition is evaluated only if the critical condition is not true. Why the other options are wrong: A) Evaluation order is not tied to weekends (schedules control when a rule is in effect). B) If the critical condition is true the rule is already critical, so the warning condition is not evaluated. C) Critical conditions are evaluated first, not the warning conditions.
17. An administrator sets a health rule evaluation time frame of 60 minutes and then tries to define a persistence threshold for a condition but cannot. What explains this?
- A. Persistence thresholds are only available for critical conditions
- B. A persistence threshold can be defined only if the evaluation time frame is 30 minutes or less(correct)
- C. Persistence thresholds can only be used with static thresholds
- D. Persistence thresholds require a custom schedule
Explanation: The documentation notes that you can define a persistence threshold for a condition only if the evaluation time frame is 30 minutes or less. Why the other options are wrong: A) The page ties persistence thresholds to the evaluation time frame, not to the critical condition type. C) The page does not tie persistence thresholds to static thresholds. D) The page does not tie persistence thresholds to custom schedules.
18. In the Controller UI, where do you view or modify error detection configuration for an application?
- A. Dashboards & Reports > Reports
- B. Troubleshoot > Violations & Anomalies
- C. Configuration > Instrumentation > Error Detection(correct)
- D. Alert & Respond > Health Rules
Explanation: The page states that in the Controller UI you open an application and navigate to Configuration > Instrumentation > Error Detection. Why the other options are wrong: A) Dashboards & Reports > Reports is where scheduled reports are managed. B) Troubleshoot > Violations & Anomalies lists health rule violations and anomalies. D) Alert & Respond > Health Rules is where health rules are managed.
19. Which statement about error detection settings is accurate according to the Error Detection Configuration page?
- A. Custom loggers and error detection using redirect pages are available for Java and .NET only(correct)
- B. Changes apply to individual business transactions only
- C. Custom loggers are available for every supported agent language
- D. Settings are shared across all languages and cannot be configured individually
Explanation: The page states that settings are configured individually for each language or platform, and gives custom loggers and redirect page error detection as available for Java and .NET only. Why the other options are wrong: B) The page states changes apply to all business transactions for the selected application and cannot be made to individual transactions. C) The page states custom loggers are for Java and .NET only. D) The page states you configure settings individually for each language or platform.
20. An administrator unchecks "Mark Business Transaction as error" for a platform. What is the effect described in the documentation?
- A. The business transactions are deleted
- B. The transactions are not added to the error count metric but are still considered in other metrics such as response time(correct)
- C. The exceptions are no longer shown in the Exceptions lists
- D. The transactions are excluded from all metrics
Explanation: If unchecked, the transactions are not added to the error count metric and are considered in other metrics, such as response time, despite the occurrence of the error. Why the other options are wrong: A) Nothing in the documentation says business transactions are deleted. C) The page does not say exceptions disappear from lists when this option is unchecked. D) The page says they are still considered in other metrics such as response time.
21. A framework exception named PostgresException is added to the list of exceptions to ignore. What happens when that exception is thrown in a business transaction?
- A. The agent counts it and lists it in Exceptions, but the transaction is not considered an error transaction(correct)
- B. The transaction is always marked as a critical health rule violation
- C. The agent stops monitoring the tier
- D. The agent does not detect it, so it never appears in the UI
Explanation: For an ignored exception the agent detects it, increments the exception count and displays it in the Exceptions lists, but the business transaction is not considered an "error transaction". Why the other options are wrong: B) Nothing in the page links ignored exceptions to critical violations. C) Nothing in the page says monitoring stops. D) The page says the agent still detects it and displays it in the Exceptions lists.
22. A custom logger definition identifies a method whose parameter at index 0 is the exception parameter. During a business transaction the method is invoked but a null object is passed in that parameter. How does Splunk AppDynamics treat the transaction?
- A. It is an error because the method was called
- B. It is an error only if the parameter is a string
- C. It is not treated as an error because a business transaction is an error only if a non-null exception object is passed(correct)
- D. It is an error only in Java
Explanation: The page states a business transaction is considered an error only if a non-null exception object is passed to the logger method. Why the other options are wrong: A) Calling the method alone is not enough; a non-null exception object must be passed. B) The parameter can be any type of object, including Arrays, so it is not restricted to strings. D) The non-null rule is not restricted to Java.
23. Which permission is required to create, edit or delete health rules?
- A. Configure Server Visibility
- B. Can Delete All Collectors
- C. Configure Diagnostic Data Collectors
- D. Configure Health Rules(correct)
Explanation: The Permissions page states that to create, edit or delete health rules you need the Configure Health Rules permission. Why the other options are wrong: A) Configure Server Visibility enables configuring Service Availability. B) Can Delete All Collectors relates to Database Visibility collectors. C) Configure Diagnostic Data Collectors relates to data collectors.
24. When creating an agent-based APM license rule, what is the maximum number of applications that you can assign to a rule?
- A. 10
- B. 50
- C. 100(correct)
- D. 1000
Explanation: The page states you can select up to 100 applications to assign to a rule. Why the other options are wrong: A) 10 is not the documented limit. B) 50 is not the documented limit. D) 1000 is not the documented limit.
25. An administrator allocates 10 Java Agent units, 10 .NET Agent units and 10 Node.js Agent units in a new APM license rule. According to the documentation, how many Machine Agent units must be allocated?
- A. 60
- B. 30(correct)
- C. 10
- D. 20
Explanation: The page states you must allocate the same number of Machine Agents as your APM Agents; with 10 Java, 10 .NET and 10 Node.js agents you must allocate 30 Machine Agent units. Why the other options are wrong: A) 60 is double the required number. C) 10 would match only one agent type, not the total APM agents. D) 20 does not match the total of 30 APM agents.